Design and construction of the technological process of product productionDrempetić, Marko (Avtor) Župerl, Uroš (Mentor) Hace, Aleš (Mentor) technological processworkpiecemilling processG and M code3D Laser scannerMaster’s thesis contains technological procedure for developing product which includes design, making of technological documentation, choosing parameters for CNC machining, and measuring of the final product. The product from this master thesis is “Oil control block”. This is one of the parts of the high voltage switchgear GIS „Gas Insulated Switchgear“ which is used for regulation of pressure during switching. The product is made from material C45 (1.0503) according to European norm EN 10277-2-2008. The technological process is shown in spreadsheet view. Also it’s explained the workholding device and the way of using it, then it’s shown the technological documentation which follows the machining process, then the NC program and 3D model. It will be shown the CNC milling machine "Matsuura H.Plus-630 Horizontal Machining Center" and the parameters for machining process. After machining process is done the workpiece is sent to the Quality Control Department where it is checked GD&T. Dimension are controlled on 3D coordinate measurement system “FARO” then the control list is generated with the appropriate software.[M. Drempetić]20162016-02-27 10:32:49Magistrsko delo/naloga57568UDK: 658.512.2:621.914.3-52(043.2)COBISS_ID: 19551510NUK URN: URN:SI:UM:DK:I7UKX8ZYsl