<?xml version="1.0"?>
<metadata xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:dc="http://purl.org/dc/elements/1.1/"><dc:title>Identification and qualitative analysis of liquid effluents in the spatial planning stage of a new nuclear power plant project</dc:title><dc:creator>Fackovič Volčanjk,	Pia	(Avtor)
	</dc:creator><dc:creator>Debelak,	Klemen	(Avtor)
	</dc:creator><dc:creator>Zupančič,	Kaja	(Avtor)
	</dc:creator><dc:creator>Žagar,	Tomaž	(Avtor)
	</dc:creator><dc:subject>JEK2</dc:subject><dc:subject>nuclear power plant</dc:subject><dc:subject>liquid effluents</dc:subject><dc:subject>radioactive discharges</dc:subject><dc:subject>non-radioactive discharges</dc:subject><dc:subject>ALARA principle</dc:subject><dc:subject>effluent management</dc:subject><dc:subject>regulatory compliance</dc:subject><dc:description>The planned JEK2 will generate liquid effluents during normal operation, categorised as radioactive and non-radioactive. The radioactive releases will consist mainly of tritium, while other radionuclides will be present only in trace amounts, all below the authorised limits. The non-radioactive effluents, originating from the cooling and service water systems, will be treated by filtration, pH adjustment and biocide neutralisation. The thermal load of the non-radioactive emissions to the Sava will be minimal to negligible levels, as the cooling tower serves as a heat sink. All the effluents from JEK2 will be managed by design through defence in depth: multi-barrier treatment and holdup, controlled storage and release, and comprehensive monitoring under the ALARA principle to keep the impacts low and within the strict regulatory limits.</dc:description><dc:date>2025</dc:date><dc:date>2026-01-22 15:01:35</dc:date><dc:type>Neznano</dc:type><dc:identifier>96669</dc:identifier><dc:identifier>UDK: 621.311.25</dc:identifier><dc:identifier>COBISS_ID: 265045763</dc:identifier><dc:identifier>DOI: 10.18690/jet.18.3.177-186.2025</dc:identifier><dc:identifier>ISSN pri članku: 1855-5748</dc:identifier><dc:language>sl</dc:language></metadata>
