20.500.12556/DKUM-25890 On the local variation of the crack driving force in a double mismatched weld A material inhomogeneity in the direction of crack extension causes a difference between the near-tip crack driving force, Jtip, and the nominally applied far-field crack driving force, Jfar. This difference can be quantified by a material inhomogeneity term, Cinh, which is evaluated by a post-processing procedure to a conventional finite element stress analysis. The magnitude of the material inhomogeneity term is evaluated for cracks in an inhomogeneous welded joint made of a high-strength low-alloy steel. Both a crack proceeding from the under-matched (UM) to the over-matched (OM) and from the OM to the UM weld metal are treated. The effects of the inhomogeneity of the different material parameters (modulus of elasticity, yield strength, and strain hardening exponent) on Cinh and Jtip are systematically studied. The results demonstrate that the material inhomogeneity term is primarily influenced by the inhomogeneity of the yield strength. A crack growing towards an OM/UM interface experiences an accelerated crack growth rate or a pop-in, an UM/OM interface leads to a reduced crack growth rate or a crack arrest. The application of global assessment methods of the mismatch effect which are included in the Engineering Treatment Model (ETM) or in the Structural Integrity Assessment Procedures for European Industry (SINTAP) is discussed. crack driving force material inhomogeneity mismatched weld interface J-integral finite element modeling gonilna sila razvoja razpoke nehomogenost materiala nehomogeni zvarni spoj meja nehomogenosti J-integral modeliranje končnih elementov true false false Angleški jezik Angleški jezik Neznano 2012-05-31 11:10:23 2012-05-31 11:10:23 2022-04-15 03:40:19 2023-12-31 03:19:12 2007 0 0 0000-00-00 NiDoloceno NiDoloceno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 621.791.05:539.42 11157526 0013-7944 URN:SI:UM:DK:OGDRWJF7 http://dx.doi.org/10.1016/j.engfracmech.2006.09.015 1 https://dk.um.si/Dokument.php?lang=slv&id=34772 Fakulteta za strojništvo 0 0 0