20.500.12556/DKUM-53173 Krmiljenje temperature hladilne vode motorja z notranjim zgorevanjem v preskuševališču Control of the cooling-water temperature for an combustion engine on a test stand V prispevku je predstavljena rešitev problema s hlajenjem motorja, ki se je pojavil, ko smo preskušali tekočinsko hlajeni motor v preskuševališču za zračno hlajene motorje z notranjim zgorevanjem. Vgradili smo toplotni prenosnik voda-voda in mešani ventil s pogonom. Krmiljenje odprtja mešalnega ventila in s tem temperature hladne vode je bilo izvedeno z računalnikom, ki smo ga uporabili tudi za zbiranje podatkov o preskušanju. Sistem je bil preskušen v laboratoriju in omogoča nastavitev želene temperature hladilne vode na vstopu v motor, neodvisno od režima delovanja motorja. The solution to an engine-cooling problem, which occured during the testing of a water-cooled internal combustion engine in a test stand for air-cooled internal combustion engines, is presented in this article. A water-to-water heat exchanger and a control valve were incorporated into an existing engine-cooling system. The cooling-water temperature was controled with a computer, which was also used for the date acquisition. The system was tested in the laboratory and allows to set the cooling-water temperature regardless of the operating regime of the engine. internal combustion engine engine cooling cooling water temperature regulation true true false Association of Mechanical Engineers and Technicians of Slovenia et al. Slovenski jezik Angleški jezik Delo ni kategorizirano 2015-07-10 19:34:31 2015-07-10 19:34:31 2022-06-02 03:09:19 2019-07-11 08:03:24 2001 0 0 str. 703-709 št. 12 Letn. 47 2001 0000-00-00 NiDoloceno NiDoloceno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 621.43:004.94 762116 4999707 0039-2480 URN:SI:UM:DK:XNZUYN2Y http://www.dlib.si/details/URN:NBN:SI:doc-BCSAFDRE 1 https://dk.um.si/Dokument.php?lang=slv&id=77733 Fakulteta za strojništvo 0 0 0