20.500.12556/DKUM-54686 Konstruiranje in izdelava komore za hlajenje s tekočim dušikom design and construction of the chamber for cooling with liquid nitrogen Namen naloge je opisati konstruiranje in izdelavo hladilne komore za hlajenje polimernih vzorcev, pri katerem lahko nadzorujemo hitrost in temperaturo ohlajanja. Potrebno je zmodelirati sistem v programskem paketu SolidWorks ter ga nato izdelati, po izdelavi testirati komoro in opisati postopek uporabe ter narediti preizkuse ohlajanja in meritve analizirat, na koncu pa podati možnosti optimiranja sistema. The purpose of this work is to present the design and the manufacture of the cold chamber for the cooling of polymer samples, so that the speed and the temperature of cooling can be controlled. It is important to model the system in the solid modelling computer-aided design software programme SolidWorks and then manufacture it. After manufacturing, it is necessary to test the chamber and describe the process of use, test the cooling and analyse the measurements. At the end the possibilities of system optimisation need to be provided. porozni polimeri konstruiranje hladilna komora regulator zamrzovanje polimernih vzorcev porous polymers design cooling chamber regulator freezing polymer samples true true false [J. Vehabović] Slovenski jezik Angleški jezik Diplomsko delo/naloga 2015-09-09 16:11:40 2015-10-27 15:16:19 2022-06-06 03:06:30 2021-05-12 03:24:47 2015 0 Maribor 0 0000-00-00 NiDoloceno NiDoloceno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 621.565-11(043.2) 19392278 URN:SI:UM:DK:LTP8MXR8 UN_Vehabovic_Jasmin_2015.pdf UN_Vehabovic_Jasmin_2015.pdf 1 36681B141C62F65FDFD2FFEF702E90C9 c1e573f556e141c69e4bcc424a72b1a8dbbab4cdc286b35bd673f3ed782509a6 bd31bb32-7c0b-11eb-bb7a-00155d0001ca https://dk.um.si/Dokument.php?lang=slv&id=80718 Fakulteta za strojništvo 0 0 0