20.500.12556/DKUM-62588 AVTOMATIZIRANA HIDRAVLIČNA STISKALNICA ZA ODPADNO EMBALAŽO AUTOMATED HYDRAULIC PRESS FOR WASTE Cilj naloge je prikazati in opisati izdelavo avtomatizirane hidravlične stiskalnice za odpadno embalažo s krmilnikom Siemens LOGO!. Naloga stroja je, da odpadkom čimbolj zmanjša volumen in s tem zmanjša stroške skladiščenja in transporta. Podrobno je predstavljena strojna in programska oprema, ki je bila uporabljena za izdelavo stroja. Opisano je delovanje stroja in vseh gradnikov, ki ga sestavljajo, ter izzivi, s katerimi smo se srečali pri izdelavi. Na koncu so zapisane še ugotovitve pri samem zagonu. The aim of this thesis is to describe and present the making of an automated hydraulic press for waste with Siemens LOGO! Controller. The task of the machine is to reduce the volume of waste for as much as possible and reduce the cost of storage and transport. The software and the individual hardware components that were used in the making of the press are described in detail. The functioning of the press is also described as well as all the challenges we faced in the making of the press. At the end there is a description of the testing of the machine. avtomatizacija PLC stroj stiskalnica automation PLC machinery press true true false M. Belej Slovenski jezik Angleški jezik Diplomsko delo 2016-08-29 21:01:33 2016-09-21 16:23:53 2022-06-29 03:09:13 2019-07-11 13:00:42 2016 0 [Maribor 0 0000-00-00 NiDoloceno NiDoloceno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 621.226:691.175(043.2) 19918358 URN:SI:UM:DK:IRGUJ29N VS_Belej_Matevz_2016.pdf VS_Belej_Matevz_2016.pdf 1 DF77707A040DE5C73440A5735AC518B9 d679ef5a6c19e18654dde573445001c69fd774187cc266388a10c96a35501d17 3372d57f-7c0d-11eb-bb7a-00155d0001ca https://dk.um.si/Dokument.php?lang=slv&id=101085 Fakulteta za elektrotehniko, računalništvo in informatiko 0 0 0