20.500.12556/DKUM-68937 IZDELAVA AVTOMATIZIRANE CELICE ZA PREGLED IN ODREZ ERMET KONTAKTOV CREATION OF AUTOMATED INSPECTION AND CUTTING CELL FOR ERMET CONTACTS V magistrskem delu je predstavljen koncept izdelave avtomatizirane celice za pregled in odrez ERMET kontaktov. Koncept sem moral razviti, ker še takšne celice trenutno ni na tržišču. Za izdelavo koncepta celice sem moral najprej preučiti trenutno stanje proizvodne linije in napake, ki se pojavljajo med samim procesom izdelave kontakta. Ugotovil sem vrste in vzroke napak.. Najpogostejša in kritična napaka je vizualni izgled kontakta. S konceptom in kasnejšo realizacijo bi ta problem rešili. Pri načrtovanju celice sem bil omejen s stroški in prostorom. Za izdelan koncept je bilo na koncu potrebno narediti analizo. S pomočjo analize sem prišel do rezultatov trenutnega koncepta in možnosti izboljšav. Cilj magistrske naloge je bila priprava koncepta, ki bo osnova za izdelavo in realizacijo nadgradnje avtomatizirane proizvodne linije. Magistrska naloga vsebuje opis trenutnega stanja, izdelavo koncepta, gradnike in analizo koncepta. In the master's work, the concept of creating an automated cell for the examination and cutting of ERMET contacts is presented. I had to develop the concept because such cells are not currently on the market. To build a cell concept, first I had to examine the current state of the production line and the errors that occurred during the process of making a contact. I came to the conclusion of what kind of errors are occurring and where the causes are. The most common and critical mistake is the visual appearance of the contact. The concept and later the realization would solve this problem. When designing a cell, I was limited by the cost and space. At the end, an analysis was needed to produce the concept. With the help of the analysis I came to the results of the current concept and what are the possible improvements. The aim of the master's work was the preparation of the concept, which will be the basis for the production and realization of the upgrade and the automated production line. The master's work contains a description of the current state, the construction of the concept, the building blocks, and the analysis of the concept Avtomatizirana celica ERMET kontakt strojni vid Automated cell ERMET contacts mechanical vision true true false [D. Čibri] Slovenski jezik Angleški jezik Magistrsko delo/naloga 2017-11-13 19:20:25 2017-12-05 08:44:45 2022-08-01 16:30:01 2019-07-11 17:15:47 2017 0 Maribor 0 0000-00-00 NiDoloceno NiDoloceno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 681.5:621.91(043.2) 21259798 URN:SI:UM:DK:VTY8UAK2 MAG_Cibri_Denis_2017.pdf MAG_Cibri_Denis_2017.pdf 1 70743AEE21B4A9D131BA81350AE69AF8 04b3d6876d9088d1ac5bc8b091296783e028b013ea8c6d8b399d739f5e43e33c 821e6849-7c0f-11eb-bb7a-00155d0001ca 20.500.12556/dkum/7d82dfbd-2579-46a1-988d-763329ee886f https://dk.um.si/Dokument.php?lang=slv&id=120407 Fakulteta za strojništvo 0 0 0