20.500.12556/DKUM-94702 Avtomatski zbijalnik satnih okvirjev diplomsko delo Automatic nailing machine for beehive frames Diplomsko delo obravnava razvoj avtomatskega zbijalnika satnih okvirjev, katerega namen je zmanjšati odvisnost od ročnega dela in izboljšati ponovljivost sestave. Ročni postopki so počasni, fizično zahtevni in pogosto vodijo do napak, zato je bila zasnovana naprava, ki združuje pet glavnih sklopov: ogrodje, zalogovnike letvic, spenjalne sklope, transportni sklop in odlagalni del. Za vsak sklop so bile pripravljene konceptne rešitve in opravljena primerjalna analiza, na podlagi katere so bile izbrane optimalne izvedbe. Poseben poudarek je bil namenjen izbiri pogona, kjer sta se kot primernejša izkazala pnevmatski in elektromehanski princip. V okviru modeliranja naprave je bila izvedena tudi interferenčna analiza, s katero je bilo preverjeno, da med delovanjem ne prihaja do medsebojnih trkov ali kolizij posameznih komponent. Rezultati analize potrjujejo funkcionalnost in izvedljivost koncepta. Na osnovi zasnove in analiz lahko pričakujemo, da bi naprava omogočila cikel približno 20 sekund na okvir ter s tem občutno izboljšala produktivnost in kakovost sestave v primerjavi z ročnim delom. Nadaljnji razvoj vključuje izdelavo prototipa in praktična testiranja. The thesis presents the development of an automatic nailing machine for beehive frames, designed to reduce manual labor and improve assembly repeatability. Manual manufacturing of frames is time-consuming, physically demanding, and often leads to errors and inconsistent product quality. To address these issues, a device was designed, consisting of five main assemblies: the supporting frame, strip feeders, nailing units, a transport system, and a stacking module. For each assembly, different conceptual solutions were considered and compared, and the most suitable variants were selected based on functionality, integration feasibility, and cost efficiency. Particular attention was given to the choice of actuation, where pneumatic and electromechanical solutions were identified as the most appropriate. As part of the CAD modeling process, an interference analysis was carried out to verify that no collisions occur between the moving parts during operation. The results confirm the feasibility and functionality of the proposed concept. Based on the design and analyses, the machine is expected to achieve a cycle time of approximately 20 seconds per frame, significantly increasing productivity and ensuring higher product quality compared to manual assembly. Future work should include prototype development and practical testing under real operating conditions. razvoj avtomatizacija satni okvir zbijalnik strojna zasnova interferenčna analiza pnevmatski pogon transportni sistem development automation beehive frame nailing machine mechanical design interference analysis pneumatic drive transport system true true false [J. Kočet] Slovenski jezik Angleški jezik Diplomsko delo/naloga 2025-08-25 22:41:47 2026-04-01 11:27:50 2026-04-15 03:08:10 0000-00-00 00:00:00 2025 0 Maribor 0 Maribor 1 spletni vir (1 datoteka PDF ([XII], 65 str.)) 0000-00-00 NiDoloceno NiDoloceno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 62-11:681.5(043.2) 275127555 UN_Kocet_Jaka_2025.pdf UN_Kocet_Jaka_2025.pdf 1 B1A3C2DF900BF31F4431C6BCC89C078F dbf773ea3aea6cfe845d42b833191e24da61f23dcc80124f5bb5ebe0df1ba4cb f121a461-947c-11f0-9f40-00155d000105 https://dk.um.si/Dokument.php?lang=slv&id=198769 Fakulteta za strojništvo 0 0 0