20.500.12556/DKUM-99480 Razvoj in vrednotenje povratne embalažne rešitve na osnovi FDM tehnologije za transport plastenk diplomsko delo Development and evaluation of a returnable packaging solution for a bottle transportation based on FDM technology Diplomsko delo obravnava uporabo modeliranja s taljenim nanosom materiala (ang. Fused Deposition Modeling; v nadaljevanju: FDM) pri razvoju embalaže za transport šestih 0,5-litrskih plastenk kot možne alternative klasičnim zabojem za večkratno uporabo. Namen raziskave je bil presoditi smotrnost te tehnologije za izdelavo tovrstne embalažne rešitve ter ovrednotiti njeno funkcionalnost pri logističnih obremenitvah. V eksperimentalnem delu smo zasnovali tridimenzionalni model (ang. three-dimensional model; v nadaljevanju: 3D-model) embalažne rešitve in izdelali štiri različice za primerjalno analizo. Tri izvedbe so bile izdelane iz polilaktične kisline (ang. Polylactic Acid; v nadaljevanju: PLA) z debelino sten 1 mm, 2 mm in 3 mm, dodatno pa je bila za primerjavo vpliva materiala natisnjena še izvedba iz polietilen tereftalat glikola (ang. Polyethylene Terephthalate Glycol; v nadaljevanju: PETG) z debelino stene 2 mm. Izdelane vzorce smo preizkusili z uporabo poenostavljenih simulacij logističnih obremenitev, izvedena pa je bila tudi ekonomska analiza smiselnosti uporabe FDM tehnologije za izdelavo embalaže. Rezultati so pokazali, da obravnavana rešitev ni primerna za širšo praktično uporabo. Ugotovitve prispevajo k boljšemu razumevanju potenciala in omejitev uporabe FDM tehnologije pri razvoju embalaže za transport pijač. The thesis discusses the use of FDM technology in the development of packaging for the transport of six 0,5-litre plastic bottles as a possible alternative to conventional reusable crates. The purpose of the research was to assess the feasibility of this technology for producing such a packaging solution and to evaluate its functionality under logistical loads. In the experimental part, a 3D-model of the packaging solution was designed, and four versions were produced for comparative analysis. Three versions were made from PLA material with wall thicknesses of 1 mm, 2 mm and 3 mm, while an additional PETG version with a wall thickness of 2 mm was printed to compare the influence of material. The produced samples were tested using simplified simulations of logistical loads, and an economic analysis was also carried out to assess the feasibility of using FDM technology for packaging production. The results showed that the analysed solution is not suitable for wider practical use. The findings contribute to a better understanding of the potential and limitations of using FDM technology in the development of packaging for beverage transport. FDM tehnologija embalaža za pijače transportna embalaža funkcionalnost embalaže FDM technology beverage packaging transport packaging packaging functionality true true false I. Kocijan Slovenski jezik Angleški jezik Diplomsko delo/naloga 2026-08-18 11:48:52 2026-09-18 11:26:06 2026-09-19 03:06:29 0000-00-00 00:00:00 2026 0 Celje 0 Celje XV, 71 0000-00-00 NiDoloceno NiDoloceno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 658.7:621.798(043.2) 291597827 VS_Kocijan_Iva_2026.pdf VS_Kocijan_Iva_2026.pdf 1 479576389FECC703D63DA6432CFD95ED 835d81f420d54109f84749d56ed62e2c780b125106a0c1cd06cf1bb46c6043f4 8bf01211-9aef-11f1-8356-00155d0001be https://dk.um.si/Dokument.php?lang=slv&id=209744 Fakulteta za logistiko 0 0 0