| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Izpis gradiva Pomoč

Naslov:Computational approach to contact fatigue damage initiation analysis of gear teeth flanks
Avtorji:ID Šraml, Matjaž (Avtor)
ID Flašker, Jože (Avtor)
Datoteke:URL http://dx.doi.org/10.1007/s00170-005-0296-2
 
Jezik:Angleški jezik
Vrsta gradiva:Neznano
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Opis:The paper describes a general computational model for the simulation of contact fatigue-damage initiation in the contact area of meshing gears. The model considers the continuum mechanics approach, where the use of homogenous and elastic material is assumed. The stress field in the contact area and the relationship between the cyclic contact loading conditions and observed contact points on the tooth flank are simulated with moving Hertzian contact pressure in the framework of the finite element method analysis. An equivalentmodel of Hertzian contact between two cylinders is used for evaluating contact conditions at the major point of contact of meshing gears. For the purpose of fatigue-damage analysis, the model, which is used for prediction of the number of loading cycles required for initial fatigue damageto appear, is based on the Coffin-Manson relationship between deformations and loading cycles. On the basis of computational results, and with consideration of some particular geometrical and material parameters, theinitiation life of contacting spur gears in regard to contact fatigue damage can be estimated.
Ključne besede:machine elements, fracture mechanics, gears, contact fatigue, crack initiation, numerical modelling, teeth flanks
Leto izida:2006
PID:20.500.12556/DKUM-25671 Novo okno
UDK:621.833:539.388.1
COBISS.SI-ID:10148374 Novo okno
ISSN pri članku:0268-3768
NUK URN:URN:SI:UM:DK:X30SFECQ
Datum objave v DKUM:30.05.2012
Število ogledov:3029
Število prenosov:100
Metapodatki:XML DC-XML DC-RDF
Področja:Ostalo
:
Kopiraj citat
  
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:Bookmark and Share



Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del revije

Naslov:The international journal of advanced manufacturing technology
Skrajšan naslov:Int. j. adv. manuf. technol.
Založnik:IFS Publications
ISSN:0268-3768
COBISS.SI-ID:25636352 Novo okno

Sekundarni jezik

Jezik:Angleški jezik
Ključne besede:strojni elementi, lomna mehanika, zobniška gonila, kontaktna utrujenost, nastanek razpoke, numerično modeliranje, bok zoba


Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj
Logotipi partnerjev Univerza v Mariboru Univerza v Ljubljani Univerza na Primorskem Univerza v Novi Gorici