| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Izpis gradiva Pomoč

Naslov:Pitting formation due to surface and subsurface initiated fatigue crack growth in contacting mechanical elements
Avtorji:ID Fajdiga, Gorazd (Avtor)
ID Glodež, Srečko (Avtor)
ID Kramar, Janez (Avtor)
Datoteke:URL http://dx.doi.org/10.1016/j.wear.2006.11.016
 
Jezik:Angleški jezik
Vrsta gradiva:Neznano
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Opis:A computational model for simulation of surface and subsurface initiated fatigue crack growth due to contact loading is presented. The model is based on fracture mechanics theory where the required materials properties are obtained from common fatigue tests. For computational simulations an equivalent model of two contacting cylinders is used instead of simulating theactual contact of mechanical elements. The discretised model with the initial crack on or under the surface is then subjected to normal contact pressure, which takes into account the EHD-lubrication conditions, and tangential loading due to friction between contacting surfaces. The model considers also the moving contact of mechanical elements and for the surface initiated crack also the fluid trapped in the crack. The virtual crack extension method, implemented in the finite element method is then used for simulating the fatigue crack growth from the initial crack up to the formationof the surface pit. The numerical results correspond well with available experimental data. The described model can be used for simulation ofpitting phenomenon of contacting mechanical elements like gears, bearings, wheels, etc.
Ključne besede:fracture mechnaics, machine elements, gears, contact fatigue, pitting, subsurface crack initiation, computational analysis
Leto izida:2007
PID:20.500.12556/DKUM-25910-b9581c53-0fbe-471a-8106-89158ee4aab8 Novo okno
UDK:621.833:539.388.1
COBISS.SI-ID:11227670 Novo okno
ISSN pri članku:0043-1648
NUK URN:URN:SI:UM:DK:PT1HWURK
Datum objave v DKUM:31.05.2012
Število ogledov:2586
Število prenosov:123
Metapodatki:XML DC-XML DC-RDF
Področja:Ostalo
:
Kopiraj citat
  
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:Bookmark and Share



Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del revije

Naslov:Wear
Skrajšan naslov:Wear
Založnik:Elsevier
ISSN:0043-1648
COBISS.SI-ID:5374213 Novo okno

Sekundarni jezik

Jezik:Angleški jezik
Ključne besede:lomna mehanika, strojni elementi, zobniki, kontaktno utrujanje, jamičenje, podpovršinska razpoka, numerična analiza


Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj
Logotipi partnerjev Univerza v Mariboru Univerza v Ljubljani Univerza na Primorskem Univerza v Novi Gorici