Dependence of material characteristics on lubrication in bulk forming process

| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Prva stran > Izpis gradiva

Izpis gradiva

Naslov:	Dependence of material characteristics on lubrication in bulk forming process
Avtorji:	ID Gusel, Leo (Avtor)
Datoteke:	http://www.infim.ro/~roam/download.php?idu=817
Jezik:	Angleški jezik
Vrsta gradiva:	Neznano
Tipologija:	1.08 - Objavljeni znanstveni prispevek na konferenci
Organizacija:	FS - Fakulteta za strojništvo
Opis:	In the paper the influence of coefficient of friction (lubricant) on different properties of cold formed material has been examined. Tensile tests, hardness measurements and electrical conductivity measurements were performed.In the frame of the experimental work the process of cold forward extrusion of a cylinder made from copper alloy was investigated. The specimens were extruded at four different lubricants coefficients of friction. The results have shown that use of different lubricators with different coefficients of friction can have effects on the material properties during and after cold forming process.
Ključne besede:	lubrication, cold forming, copper alloy, mechanical properties
Leto izida:	2009
PID:	20.500.12556/DKUM-26519
UDK:	621.7:621.89
COBISS.SI-ID:	13740822
ISSN pri članku:	Y506-6409
NUK URN:	URN:SI:UM:DK:TQMJ3UCQ
Datum objave v DKUM:	31.05.2012
Število ogledov:	1867
Število prenosov:	27
Metapodatki:
Področja:	Ostalo
:	Kopiraj citat

Skupna ocena:	(0 glasov)
Vaša ocena:	Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:

Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Naslov:	The journal of optoelectronics and advanced materials - symposia
Založnik:	National Institute of Material Physics
ISSN:	2066-0596
COBISS.SI-ID:	13736214

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)

0 - 0 / 0

Ni komentarjev!

Nazaj