| Naslov: | Effect of vibration on weld metal hardness and toughness |
|---|
| Avtorji: | ID Pučko, Bogdan (Avtor)
ID Gliha, Vladimir (Avtor) |
|---|
| Datoteke: |  http://dx.doi.org/10.1179/174329305X40651
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Neznano |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Vibration of welded parts is usually applied to achieve effects similar to thermal stress relief. With vibration, it is not only residual stresses that are affected. Using two different welding processes, the influence of vibration on hardness and toughness of the weld was measured. For each weldingprocess, two series of Charpy specimens were made over the temperature range from -60 to +20°C. The only difference between the two series was in performing welding with or without vibration. Slight differences in weld metalhardness were observed. Toughness measurements show an increase in impacttoughness and a significant increase in fracture toughness in samples which were vibrated during welding. |
|---|
| Ključne besede: | welding, welded joints, residual stresses, vibrational stress relief, hardness, toughness, steel |
|---|
| Leto izida: | 2005 |
|---|
| PID: | 20.500.12556/DKUM-27037  |
|---|
| UDK: | 621.791.05:620.178.3 |
|---|
| COBISS.SI-ID: | 9701654 |
|---|
| ISSN pri članku: | 1362-1718 |
|---|
| NUK URN: | URN:SI:UM:DK:SOD6DQGF |
|---|
| Datum objave v DKUM: | 01.06.2012 |
|---|
| Število ogledov: | 2787 |
|---|
| Število prenosov: | 101 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
