Thread loadings in different measuring positions on the sewing machine

| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Prva stran > Izpis gradiva

Izpis gradiva

Naslov:	Thread loadings in different measuring positions on the sewing machine
Avtorji:	ID Žunič-Lojen, Darja (Avtor) ID Geršak, Jelka (Avtor)
Datoteke:	http://dx.doi.org/10.1177/0040517505053870
Jezik:	Angleški jezik
Vrsta gradiva:	Neznano
Tipologija:	1.01 - Izvirni znanstveni članek
Organizacija:	FS - Fakulteta za strojništvo
Opis:	The knowledge of sewing thread tension determined at different measuring locations on the sewing machine is the basis for the definition of the loading magnitudes acting during the stitch formation process and the locations at which they appear, concerning the stitch cycle or the main shaft turn of the sewing machine. During the stitch formation process the sewing thread is exposed to the highest tension in the region between the tension regulator and the thread take-up lever, following by tension in the region between the take-up lever and the needle and in the region in front of the tension regulator. Dynamic tension and tension force are also dependent on stitch velocity.
Ključne besede:	textile industry, sewing, kinetics of sewing, thread, dynamic thread loadings
Leto izida:	2005
PID:	20.500.12556/DKUM-27046
UDK:	687.02
COBISS.SI-ID:	9778710
ISSN pri članku:	0040-5175
NUK URN:	URN:SI:UM:DK:HDLUH0IK
Datum objave v DKUM:	01.06.2012
Število ogledov:	2340
Število prenosov:	105
Metapodatki:
Področja:	Ostalo
:	Kopiraj citat

Skupna ocena:	(0 glasov)
Vaša ocena:	Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:

Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Jezik:	Angleški jezik
Ključne besede:	tekstilna industrija, šivanje, kinetika šivanja, sukanec, dinamične obremenitve sukanca

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)

0 - 0 / 0

Ni komentarjev!

Nazaj