| Naslov: | Evolutionary approach for cutting forces prediction in milling |
|---|
| Avtorji: | ID Kovačič, Miha (Avtor)
ID Balič, Jože (Avtor)
ID Brezočnik, Miran (Avtor) |
|---|
| Datoteke: |  http://dx.doi.org/10.1016/j.jmatprotec.2004.04.318
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Neznano |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Knowing cutting forces is important for choosing cutting parameters for milling. Traditionally, cutting forces are calculated by equation which includes empirically measured specific cutting forces. In the article modelling of cutting forces with genetic programming is proposed, which imitates principles of living beings. Measurements have been made for two materials (aluminium alloy AlMgSi1 and steel 1.2343) and two different types of milling (conventional milling and STEP milling). For each material and type of milling parameters, tensile strength and hardness of workpiece, tool diameter, cutting depth, spindle speed, feeding and type of milling were monitored, and for each combination of milling parameters cutting forces were measured. On the basis of the experimental data, different models for cutting forces prediction were obtained by genetic programming. Research shows that genetically developed models fit the experimental data. |
|---|
| Ključne besede: | milling, simulation, milling cutting forces prediction, genetic programming |
|---|
| Leto izida: | 2004 |
|---|
| PID: | 20.500.12556/DKUM-27516  |
|---|
| UDK: | 621.914:004.89 |
|---|
| COBISS.SI-ID: | 8811542 |
|---|
| ISSN pri članku: | 0924-0136 |
|---|
| NUK URN: | URN:SI:UM:DK:A302ZY3U |
|---|
| Datum objave v DKUM: | 01.06.2012 |
|---|
| Število ogledov: | 1693 |
|---|
| Število prenosov: | 86 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
