| Naslov: | Reinforced prefabricated timber shear walls |
|---|
| Avtorji: | ID Premrov, Miroslav (Avtor)
ID Dobrila, Peter (Avtor) |
|---|
| Datoteke: |  http://www.acadjournal.com/2002/v8/part8/p1/index.html
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Neznano |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FGPA - Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo
|
|---|
| Opis: | The paper presents results of shear-bending experiments performed on panel shear walls used as load-carrying capacity walls in the construction of prefabricated timber structures. The aim of research is to determine the difference in resistance and ductility between panel shear walls, reinforced with two different methods. While the first, reinforcing with additional fiberboard, was not improve resistance and especially ductility in the contended sense, we tried to find a solution by inserting diagonal steel strips, which were fixed to the timber frame. Additionally, analytical solutions of those by mathematical modeling with the fictive thickness and height of fiber-plaster boards are proposed. Presented design models are simple and show a good coincidence with the measured results. |
|---|
| Ključne besede: | timber structures, shear walls, shear bending tests, mathematical modelling |
|---|
| Leto izida: | 2002 |
|---|
| PID: | 20.500.12556/DKUM-27873  |
|---|
| UDK: | 692.2.057:624.07 |
|---|
| COBISS.SI-ID: | 7500054 |
|---|
| ISSN pri članku: | Y504-6874 |
|---|
| NUK URN: | URN:SI:UM:DK:SOQWYKWB |
|---|
| Datum objave v DKUM: | 01.06.2012 |
|---|
| Število ogledov: | 3470 |
|---|
| Število prenosov: | 45 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
