| Naslov: | Modification of non-woven cellulose for medical applications using non-equlibrium gassious plasma |
|---|
| Avtorji: | ID Stana-Kleinschek, Karin (Avtor)
ID Peršin Fratnik, Zdenka (Avtor)
ID Maver, Tina (Avtor) |
|---|
| Datoteke: |  Materiali_in_Tehnologije_2011_Stana-Kleinschek,_Persin,_Maver_Modification_of_Non-Woven_Cellulose_for_Medical_Applications_Using_Non-Equ.pdf (101,91 KB)
MD5: 8F9A5D0D723A4E181E17DAAE9BB745EC
 http://mit.imt.si/Revija/izvodi/mit113/stana.pdf
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | This paper presents the use of a non-equilibrium gaseous plasma technique for the activation of regenerated non-woven cellulose, as used in the preparation of wound-dressing materials. Plasma technology provides surface modification according to the required quality in terms of speed, homogeneity, process stability, and efficiency. In this study the non-woven cellulose was exposed to oxygen plasma (O2) in order to acquire the natural polymer's super-hydrophilicity which, among others, defines the materials' usability forwound-dressing. The influence of the plasma parameters on the material's hydrophilicity was studied; and the optimal plasma conditions defined. Combinations of different experimental techniques (contact angle, water retention value, and moisture content) were studied and correlated with the mechanical properties, as a function of plasma modification. The specific adsorption capacity of the non-woven cellulose using oxygen plasma treatment was achieved. In the next step, this material with increased hydrophilicity and improved mechanical properties will be used in the preparation of multilayered wound-dressing materials for specific functionalities (incorporation of drugs, specific functional properties). |
|---|
| Ključne besede: | plasma, oxygen, regenerated non-woven cellulose, super-hydrophilicity, mechanical properties |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Založnik: | Inštitut za kovinske materiale in tehnologije |
|---|
| Leto izida: | 2011 |
|---|
| Št. strani: | str. 253-257 |
|---|
| Številčenje: | Letn. 45, št. 3 |
|---|
| PID: | 20.500.12556/DKUM-52248  |
|---|
| ISSN: | 1580-2949 |
|---|
| UDK: | 678:533.9:61 |
|---|
| COBISS.SI-ID: | 860330 |
|---|
| ISSN pri članku: | 1580-2949 |
|---|
| NUK URN: | URN:SI:UM:DK:MXWCEHHA |
|---|
| Datum objave v DKUM: | 10.07.2015 |
|---|
| Število ogledov: | 1431 |
|---|
| Število prenosov: | 125 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
