| Naslov: | Liquid metal/ceramic interfaces in dental practice and jewellery manufacturing |
|---|
| Avtorji: | ID Raić, Karlo (Avtor)
ID Rudolf, Rebeka (Avtor)
ID Todorović, Aleksandar (Avtor)
ID Stamenković, Dragoslav (Avtor)
ID Anžel, Ivan (Avtor) |
|---|
| Datoteke: |  Materiali_in_Tehnologije_2010_Raic_et_al._Liquid_MetalCeramic_Interfaces_in_Dental_Practice_and_Jewellery_Manufacturing.pdf (479,04 KB)
MD5: E018B3314A2D0440CA16E4E92B70E209
 http://mit.imt.si/Revija/izvodi/mit102/raic.pdf
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.02 - Pregledni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Metal-ceramic fusing has been the essential step in obtaining materials that benefit from both ceramic and metal constituents, i.e. where the combined properties of metal and ceramic layers are desirable. When considering fusing methods, soldering and active metal brazing are the most effective. These processes involve braze melting and flowing between the two pieces of material. In the first part the phenomena occurring on the boundary between the ceramics and the active filler metal during the metal-ceramics joining are discussed. Three interconnected sub-processes are considered: (1) wetting of the ceramic surface, (2) chemical reactions at the interface and (3) diffusion with a moving interface. Then, the appearances at the grain boundary grooves of the ceramic surface are presented as phenomena on the catalytic surface. In the second part, examples from dental practice and jewellery manufacturing are used for comparative analysis. Finally, we discuss the composition and properties of the soldering and brazing alloys used for dental practice and jewellery manufacturing. |
|---|
| Ključne besede: | metal-ceramic bonding, brazing, soldering, dentistry, jewellery |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Leto izida: | 2010 |
|---|
| Št. strani: | str. 59-66 |
|---|
| Številčenje: | Letn. 44, št. 2 |
|---|
| PID: | 20.500.12556/DKUM-52407  |
|---|
| ISSN: | 1580-2949 |
|---|
| UDK: | 669:666:616.31:739 |
|---|
| COBISS.SI-ID: | 14027542 |
|---|
| ISSN pri članku: | 1580-2949 |
|---|
| NUK URN: | URN:SI:UM:DK:SXJHEP3H |
|---|
| Datum objave v DKUM: | 10.07.2015 |
|---|
| Število ogledov: | 1722 |
|---|
| Število prenosov: | 137 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
