| Naslov: | A numerical simulation of metal injection moulding |
|---|
| Avtorji: | ID Berginc, Boštjan (Avtor)
ID Brezočnik, Miran (Avtor)
ID Kampuš, Zlatko (Avtor)
ID Šuštaršič, Borivoj (Avtor) |
|---|
| Datoteke: |  Materiali_in_Tehnologije_2009_Berginc_et_al._a_Numerical_Simulation_of_Metal_Injection_Moulding.pdf (1,65 MB)
MD5: 61FB8487A554120BEE24A078F1F95C1E
 http://mit.imt.si/Revija/izvodi/mit091/berginc.pdf
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Metal injection moulding (MIM) is already a well-established and promising technology for the mass production of small, complex, near-net-shape products. The dimensions and mechanical properties of MIM products are influenced by the feedstock characteristics, the process parameters of the injection moulding, as well as the debinding and the sintering. Numerical simulations are a very important feature of the beginning of any product or technology development. In the article two different techniques for measuring the rheological properties of MIM feedstocks are presented and compared. It was established that capillary rheometers are more appropriate for MIM feed stocks, while on the other hand, parallel-plate rheometers are only suitable for shear rates lower than 10 s[sup]{-1}. Later on we used genetic algorithms to determine the model coefficients for some numerical simulation software. The results of the simulation of the filling phase and a comparison with the experimental results are presented in the article. |
|---|
| Ključne besede: | metal injection moulding, numerical simulation, genetic algorithms |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Leto izida: | 2009 |
|---|
| Št. strani: | str. 43-48 |
|---|
| Številčenje: | Letn. 43, št. 1 |
|---|
| PID: | 20.500.12556/DKUM-58161  |
|---|
| ISSN: | 1580-2949 |
|---|
| UDK: | 678.621:621.742.4 |
|---|
| COBISS.SI-ID: | 716714 |
|---|
| ISSN pri članku: | 1580-2949 |
|---|
| NUK URN: | URN:SI:UM:DK:VUHSLD6H |
|---|
| Datum objave v DKUM: | 14.03.2017 |
|---|
| Število ogledov: | 1473 |
|---|
| Število prenosov: | 186 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
