IZBOLJŠANJE PROCESA MERJENJA RAZTRŽNE SILE NA STATORSKEM PAKETU S POMOČJO METODOLOGIJE 6 SIGMA

Marenk, Danica

| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Prva stran > Izpis gradiva

Izpis gradiva

Naslov:	IZBOLJŠANJE PROCESA MERJENJA RAZTRŽNE SILE NA STATORSKEM PAKETU S POMOČJO METODOLOGIJE 6 SIGMA
Avtorji:	ID Marenk, Danica (Avtor) ID Maletič, Matjaž (Mentor) Več o mentorju...
Datoteke:	VS_Marenk_Danica_2016.pdf (1,81 MB) MD5: 6F3B4E07284932D48AF49A170936A689
Jezik:	Slovenski jezik
Vrsta gradiva:	Diplomsko delo/naloga
Organizacija:	FOV - Fakulteta za organizacijske vede
Opis:	V diplomskem delu je predstavljeno izboljševanje procesa merjenja raztržne sile statorskih paketov. Spremljali smo delo v oddelku kakovosti poslovne enote komponente, kjer se soočamo s stroškovno in časovno neučinkovitim procesom merjenja, kar ima za posledico velike stroške in nezadovoljstvo vseh vpletenih v obravnavani proces. Na podlagi opisa obstoječega stanja in kritične analize so predstavljeni predlogi za izboljšanje posameznega segmenta procesa merjenja raztržne sile statorskih paketov, s katerimi smo dosegli zastavljeni cilj – »biti korak pred konkurenco«. Prenova procesa temelji na sistematičnem postopku DMAIC (Definiraj, Izmeri, Analiziraj, Izboljšaj, Preveri), ki je del metodološkega pristopa 6-Sigma. Namen analize je bilo poiskati ustrezne rešitve, s katerimi smo poenostavili in skrajšali proces merjenja raztržne sile statorskih paketov. Glavni gonilniki, na katere smo se osredinili, so zmanjšanje izmeta, skrajšanje časa postopka merjenja in prihranek na materialu, ki vstopa v proces merjenja. Rezultati, do katerih smo prišli po postopku DMAIC, so zadovoljivi. Realizirani so vsi poglavitni cilji: medtem ko smo zmanjšali izmet statorskih paketov za več kot 40 odstotkov in skrajšali čas tekočih kontrolorjev za več kot 20 odstotkov, smo porabo lepila zmanjšali za več kot 50 odstotkov.
Ključne besede:	management kakovosti, 6-sigma, proces, merjenje, izboljšanje, DMAIC
Kraj izida:	Maribor
Leto izida:	2016
PID:	20.500.12556/DKUM-58576
COBISS.SI-ID:	7591955
NUK URN:	URN:SI:UM:DK:IV3VYYLJ
Datum objave v DKUM:	27.05.2016
Število ogledov:	1267
Število prenosov:	193
Metapodatki:
Področja:	FOV
:	Kopiraj citat

Skupna ocena:	(0 glasov)
Vaša ocena:	Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:

Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Sekundarni jezik

Jezik:	Angleški jezik
Naslov:	IMPROVEMENT OF MEASUREMENT PROCESS OF PUSH OUT FORCES ON STATOR STACK WITH 6 SIGMA METODOLOGY
Opis:	The purpose of this diploma thesis is to present the process improvement of push-out forces measurement on stator stack. The analysis of the studied process was carried out in the quality department of the components business unit, where we are facing with increased tangible as well as intangible costs. Based on the description of the current situation and performed critical analysis, the improvement proposals for each stage of the push-out forces measurement process were suggested. Herewith, the improvement was based on the premise that improvement activities can accomplish our main goal that is “being a step ahead of the competitors”. The empirical part of the thesis is based on systematic approach of DMAIC methodology (Define, Measure, Analyse, Improve, Control), which is part of the 6-Sigma approach. The purpose of the analysis was to find out particular solutions that in terms of process simplification as well as to decrease measuring time of push-out force test on the stator stack. The focal point in this thesis was placed on the following main drivers: decreasing scrap, decreasing measuring time and to save income material which is the main part of the process we are dealing with. Drawing upon the results of the DMAIC methodology, one can conclude that the main objectives that were set at the beginning of the Six Sigma project, were reached. They are as follows: decreasing stator stack scrap for more than 40 percentage, decreasing measuring time of quality inspectors for more than 20 percentage as well as decreasing consumption of glue for more than 50 percentage.
Ključne besede:	quality management, six sigma, process, measuring, improvement, DMAIC

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)

0 - 0 / 0

Ni komentarjev!

Nazaj