| Naslov: | Reliable and accurate release of micro-sized objects with a gripper that uses the capillary-force method |
|---|
| Avtorji: | ID Uran, Suzana (Avtor)
ID Šafarič, Riko (Avtor)
ID Bratina, Božidar (Avtor) |
|---|
| Datoteke: |  Micromachines_2017_Uran,_Safaric,_Bratina_Reliable_and_Accurate_Release_of_Micro-Sized_Objects_with_a_Gripper_that_Uses_the_Capillary-Fo.pdf (4,70 MB)
MD5: 5BBABCA873E3D43A3509E36C84CAC717
 http://www.mdpi.com/2072-666X/8/6/182
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FERI - Fakulteta za elektrotehniko, računalništvo in informatiko
|
|---|
| Opis: | There have been recent developments in grippers that are based on capillary force and condensed water droplets. These are used for manipulating micro-sized objects. Recently, one-finger grippers have been produced that are able to reliably grip using the capillary force. To release objects, either the van der Waals, gravitational or inertial-forces method is used. This article presents methods for reliably gripping and releasing micro-objects using the capillary force. The moisture from the surrounding air is condensed into a thin layer of water on the contact surfaces of the objects. From the thin layer of water, a water meniscus between the micro-sized object, the gripper and the releasing surface is created. Consequently, the water meniscus between the object and the releasing surface produces a high enough capillary force to release the micro-sized object from the tip of the one-finger gripper. In this case, either polystyrene, glass beads with diameters between 5–60 µm, or irregularly shaped dust particles of similar sizes were used. 3D structures made up of micro-sized objects could be constructed using this method. This method is reliable for releasing during assembly and also for gripping, when the objects are removed from the top of the 3D structure—the so-called “disassembling gripping” process. The accuracy of the release was lower than 0.5 µm. |
|---|
| Ključne besede: | micro-objects, one-finger gripper, gripping, releasing, capillary force |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Leto izida: | 2017 |
|---|
| Št. strani: | str. 1-16 |
|---|
| Številčenje: | Letn. 8, št. 6 |
|---|
| PID: | 20.500.12556/DKUM-66340  |
|---|
| ISSN: | 2072-666X |
|---|
| UDK: | 681.5 |
|---|
| COBISS.SI-ID: | 20606742 |
|---|
| DOI: | 10.3390/mi8060182 |
|---|
| ISSN pri članku: | 2072-666X |
|---|
| NUK URN: | URN:SI:UM:DK:VXWGZUCD |
|---|
| Datum objave v DKUM: | 21.06.2017 |
|---|
| Število ogledov: | 1250 |
|---|
| Število prenosov: | 610 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
