| Naslov: | The influence of electric arc activation on the speed of heating and the structure of metal in welds |
|---|
| Avtorji: | ID Savytsky, Oleksandr (Avtor)
ID Savytsky, Mychailo (Avtor)
ID Bajić, Darko (Avtor)
ID Shkrabalyuk, Yuriy (Avtor)
ID Vuherer, Tomaž (Avtor) |
|---|
| Datoteke: |  Thermal_Science_2016_Savytsky_et_al._The_influence_of_electric_ARC_activation_on_the_speed_of_heating_and_the_structure_of_metal_in_weld.pdf (592,40 KB)
MD5: E252CC9AE73387FA9F7A3D55BDBACD47
PID: 20.500.12556/dkum/425a4d61-1eba-4886-a906-aaa45a46e6e4
 http://www.doiserbia.nb.rs/Article.aspx?ID=0354-98361400125S
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | This paper presents the results of a research related to the impact of electric arc activation onto drive welding energy and metal weld heating speed. It is confirmed that ATIG and AMIG methods, depending on metal thickness, single pass weldability and chemical composition of activating flux, enable the reduction of welding energy by 2-6 times when compared to conventional welding methods. Additionally, these procedures create conditions to increase metal weld heating speed up to 1,500-5,500 °C/s-1. Steel which can be rapidly heated, allows for a hardened structure to form (with carbon content up to 0.4%), together with a released martensitic structure or a mixture of bainitic-martensitic structures. Results of the research of effectiveness of ATIG and AMIG welding showed that increase in the penetration capability of electric arc, which increases welding productivity, is the visible side of ATIG and AMIG welding capabilities. |
|---|
| Ključne besede: | arc welding, active flux, penetration, heating speed, driving energy |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Leto izida: | 2016 |
|---|
| Št. strani: | str. 239-246 |
|---|
| Številčenje: | Letn. 20, št. 1 |
|---|
| PID: | 20.500.12556/DKUM-66742  |
|---|
| ISSN: | 0354-9836 |
|---|
| UDK: | 621.791:536.2 |
|---|
| COBISS.SI-ID: | 18492438 |
|---|
| DOI: | 10.2298/TSCI140530125S |
|---|
| ISSN pri članku: | 0354-9836 |
|---|
| NUK URN: | URN:SI:UM:DK:Y1J9S1NT |
|---|
| Datum objave v DKUM: | 07.07.2017 |
|---|
| Število ogledov: | 1432 |
|---|
| Število prenosov: | 381 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
