| Naslov: | Comparative model analysis of two types of clamping elements in dynamic conditions |
|---|
| Avtorji: | ID Todorovic, Petar (Avtor)
ID Buchmeister, Borut (Avtor)
ID Djapan, Marko (Avtor)
ID Vukelić, Djordje (Avtor)
ID Milosevic, Marko (Avtor)
ID Tadic, Branko (Avtor)
ID Radenkovic, Milan (Avtor) |
|---|
| Datoteke: |  Tehnicki_vjesnik_2014_Todorovic_et_al._Comparative_model_analysis_of_two_types_of_clamping_elements_in_dynamic_conditions.pdf (1,39 MB)
MD5: E90404AAF5F76C0927B72276C5608D48
PID: 20.500.12556/dkum/2d0066b1-0f8b-42fd-a402-3b78c867699c
 http://hrcak.srce.hr/131214
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | This paper studies the compliance of the fixture-workpiece system. Workpiece clamping case with two types of clamping elements is considered. The first type of clamping element is standard, with flat top, while the second one is specially designed, with round cutting insert. Analyzed was the case of workpiece clamping using small forces, whereby the deformations in the workpiece/clamping element interface are predominantly on the order of magnitude of roughness height. A comparative analysis of dynamic behaviour of both types of clamping elements is also presented. In comparison with its standard counterpart, the specially designed clamping element with round cutting insert has superior clamping performance regarding both tangential load capacity and compliance. |
|---|
| Ključne besede: | clamping, clamping element design, product development, machining, cutting, compliance, fixture, roughness, analysis, dinamical behaviour |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Leto izida: | 2014 |
|---|
| Št. strani: | str. 1273-1279 |
|---|
| Številčenje: | Letn. 21, št. 6 |
|---|
| PID: | 20.500.12556/DKUM-66803  |
|---|
| ISSN: | 1330-3651 |
|---|
| UDK: | 621.881-11 |
|---|
| COBISS.SI-ID: | 18348310 |
|---|
| ISSN pri članku: | 1330-3651 |
|---|
| NUK URN: | URN:SI:UM:DK:PCYXH789 |
|---|
| Datum objave v DKUM: | 11.07.2017 |
|---|
| Število ogledov: | 1354 |
|---|
| Število prenosov: | 132 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
