| Naslov: | Intelligent design and optimization of machining fixtures |
|---|
| Avtorji: | ID Vukelić, Djordje (Avtor)
ID Šimunović, Goran (Avtor)
ID Tadic, Branko (Avtor)
ID Buchmeister, Borut (Avtor)
ID Šarić, Tomislav (Avtor)
ID Simeunovic, Nenad (Avtor) |
|---|
| Datoteke: |  Tehnicki_vjesnik_2016_Vukelic_et_al._Intelligent_design_and_optimization_of_machining_fixtures.pdf (2,97 MB)
MD5: F1A56C97F5F607C66B025DCAADC76FC6
PID: 20.500.12556/dkum/8f58c565-62c3-425a-89ed-45d0bf811b73
 http://hrcak.srce.hr/167490
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | This work presents an integral system for machining fixture layout design and optimization. The optimization module of this system allows determination of optimal positions of locating and clamping elements, which provides required accuracy and surface quality, while at the same time guarantees design of collision-free fixtures. The design module performs selection of required fixture elements based on a set of predefined production rules. Adequate criteria for the selection of fixture elements are defined for locating, clamping, tool guiding, and tool adjustment elements, as well as for fixture body elements, connecting elements and add-on elements. The system uses geometry and feature workpiece characteristics, as well as the additional machining, and process planning information. It has been developed to accommodate machining processes of turning, drilling, milling, and grinding of rotational and prismatic workpieces. A segment of output results is also shown. Finally, conclusions are presented with directions for future investigation. |
|---|
| Ključne besede: | artificial intelligence, fixture, process planning |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Leto izida: | 2016 |
|---|
| Št. strani: | str. 1325-1334 |
|---|
| Številčenje: | Letn. 23, št. 5 |
|---|
| PID: | 20.500.12556/DKUM-66816  |
|---|
| ISSN: | 1330-3651 |
|---|
| UDK: | 681.5 |
|---|
| COBISS.SI-ID: | 19935766 |
|---|
| DOI: | 10.17559/TV-20150908142130 |
|---|
| ISSN pri članku: | 1330-3651 |
|---|
| NUK URN: | URN:SI:UM:DK:97RV03RT |
|---|
| Datum objave v DKUM: | 12.07.2017 |
|---|
| Število ogledov: | 1557 |
|---|
| Število prenosov: | 418 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
