| Naslov: | Rigid body dynamics in optimization of the machine tool vibroisolation |
|---|
| Avtorji: | ID Slavković, Radomir (Avtor)
ID Veg, Aleksandar (Avtor)
ID Dučić, Nedeljko (Avtor)
ID Slavković, Nikola (Avtor)
ID Baralić, Jelena (Avtor)
ID Milićević, Ivan (Avtor) |
|---|
| Datoteke: |  Tehnicki_vjesnik_2015_Slavkovic_Rigid_body_dynamics_in_optimization_of_the_machine_tool_vibroisolation.pdf (2,13 MB)
MD5: ECF9B59D2CB86719E5817E316EFAEDD1
PID: 20.500.12556/dkum/24fc35dc-9e3b-451c-ad92-78c716e2ca00
 http://hrcak.srce.hr/135067
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Modern design of the machine tool treats the suspending parts as a crucial element of the effective vibration isolation. Therefore the suspending items are specifically developed and subjected to extensive tests before being applied on real objects. These elements ensure accurate levelling and appropriate vibration damping. Usually selection of inadequate support element causes intensive disturbing effects in machining. The paper presents dynamics analysis of the machine tool suspended on flexible mountings. The overall analysis is conceived on a rigid body dynamics. This method enables selection of an optimal supporting configuration. Further on such an effective suspension design prevents a need for expensive monitoring of the dynamic characteristics of the mechanical system, i.e. machine tool and supports. The paper explores dynamics of a real, flexibly supported machine tool. Results are obtained with the assistance of the "SUPPORT" software. Finally the theoretical and computational statements are approved throughout extensive site measurements on the machine tool body with appropriate instrumentation. |
|---|
| Ključne besede: | dynamics analysis, experiment, machine tool, software, transfer function |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Leto izida: | 2015 |
|---|
| Št. strani: | str. 87-94 |
|---|
| Številčenje: | Letn. 22, št. 1 |
|---|
| PID: | 20.500.12556/DKUM-66826  |
|---|
| ISSN: | 1330-3651 |
|---|
| UDK: | 621.7:004.42 |
|---|
| COBISS.SI-ID: | 18548246 |
|---|
| DOI: | 10.17559/TV-20130918225023 |
|---|
| ISSN pri članku: | 1330-3651 |
|---|
| NUK URN: | URN:SI:UM:DK:WYBWPNS0 |
|---|
| Datum objave v DKUM: | 12.07.2017 |
|---|
| Število ogledov: | 1198 |
|---|
| Število prenosov: | 438 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
