| Naslov: | Load transfer and stress in a piled gravity retaining wall |
|---|
| Avtorji: | ID Chen, Qun (Avtor)
ID Wan, Li (Avtor)
ID He, Changrong (Avtor)
ID Lai, Zihui (Avtor)
ID Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo Univerze v Mariboru (Lastnik avtorskih pravic) |
|---|
| Datoteke: |  Acta_geotechnica_Slovenica_2010_Chen_et_al._Load_transfer_and_stress_in_a_piled_gravity_retaining_wall.pdf (558,92 KB)
MD5: 815F7822970A1369F0DEA31CE55AD2E1
PID: 20.500.12556/dkum/f44b7abc-d56f-4f27-833f-104d2515c3a1
 http://fgserver3.fg.um.si/journal-ags/2010-2/article-4.asp
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FGPA - Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo
|
|---|
| Opis: | The piled retaining wall is a new type of railway retaining structure in China. In the current design, the retaining wall, the beam and the piles are assumed to be independent components. Both the mutual action of the retaining wall, the piles and beam, and the influence of the soil or rock foundation on the structure are not fully considered, so that there are some limitations in the current design method. In this paper, using field observations and a three-dimensional finite-element analysis, the lateral earth pressure on the wall back, the stress distributions and the forces of the reinforcements in the beam and the pile were studied. The simulation results were in good agreement with the field observation data. These results revealed that the tensile stresses were very small and that these stresses were positive in most zones in the beam and the pile. It can also be observed that the tensile stresses or forces in the beam and pile obtained in this study were much smaller than those obtained using the current design method. This clarified the fact that the current design method used for the beam and the pile was very conservative and that it should be optimized to consider the effect of the foundation on the whole structure and the interactions among the different components. |
|---|
| Ključne besede: | piled gravity retaining wall, field observation, finite-element analysis, stress, load transfer mechanism |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Leto izida: | 2010 |
|---|
| Št. strani: | str. 47-52 |
|---|
| Številčenje: | Letn. 7, št. 2 |
|---|
| PID: | 20.500.12556/DKUM-70732  |
|---|
| ISSN: | 1854-0171 |
|---|
| UDK: | 624.15 |
|---|
| COBISS.SI-ID: | 257463552 |
|---|
| ISSN pri članku: | 1854-0171 |
|---|
| NUK URN: | URN:SI:UM:DK:VTL6SQMX |
|---|
| Avtorske pravice: | Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo Univerze v Mariboru |
|---|
| Datum objave v DKUM: | 11.06.2018 |
|---|
| Število ogledov: | 1380 |
|---|
| Število prenosov: | 105 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
