| Naslov: | Correlation between the point load index, $I_{s(50)}$, and the resistance to unconfined compression in limestone from the comunidad Valenciana, Spain |
|---|
| Avtorji: | ID Galván, Manolo (Avtor)
ID Preciado, Jorge (Avtor)
ID Serón, Jose (Avtor)
ID Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo Univerze v Mariboru (Lastnik avtorskih pravic) |
|---|
| Datoteke: |  Acta_geotechnica_Slovenica_2014_Galvan,_Preciado,_Serón_Correlation_between_the_point_load_index,_I_subs_(50),_and_the_resistance_to_unc.pdf (398,58 KB)
MD5: B02091693F677CA034F05EB8AC52C0F2
PID: 20.500.12556/dkum/f824b079-5a1d-48a6-9304-1e2583adc854
 http://fgserver3.fg.um.si/journal-ags/2014-2/article-3.asp
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FGPA - Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo
|
|---|
| Opis: | The unconfined compression strength is one of the most important engineering parameters in rock mechanics; it is used to characterize and study the behaviour of solid rocks. A good correlation between the unconfined compression strength test (UCS) and the point load strength (PLS) can be very useful, because it allows for faster and cheaper testing than other methods with the same security to calculate the structures and performances of solid rocks. A preliminary step to implement the correlation is to have a good method to determine the resistance to a point load. This determination is correct if we have a sufficient number of tests on specimens of the same nature, but usually this does not occur, and it is necessary to apply a size-correction factor, F = (De/50)α, with α = 0.45. This paper is based on limestone from Comunidad Valenciana, Spain, because it represents a very high percentage of the rocks. The implementation was conducted over 700 field and laboratory tests, of which 255 are PLT tests, 45 are UCS tests, and the rest are other parameters, like porosity and specific weight, Slake Durability, and ultrasonic velocity. |
|---|
| Ključne besede: | resistance to point load, point load strength, Franklin test, size correction factor, unconfined compression |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Leto izida: | 2014 |
|---|
| Št. strani: | str. 35-45 |
|---|
| Številčenje: | Letn. 11, št. 2 |
|---|
| PID: | 20.500.12556/DKUM-70821  |
|---|
| ISSN: | 1854-0171 |
|---|
| UDK: | 624.131.3:552.541 |
|---|
| COBISS.SI-ID: | 281011456 |
|---|
| ISSN pri članku: | 1854-0171 |
|---|
| NUK URN: | URN:SI:UM:DK:IKQ5L1TJ |
|---|
| Avtorske pravice: | Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo Univerze v Mariboru |
|---|
| Datum objave v DKUM: | 14.06.2018 |
|---|
| Število ogledov: | 1380 |
|---|
| Število prenosov: | 110 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
