| Naslov: | Long-term creep compliance of wood polymer composites: using untreated wood fibers as a filler in recycled and neat polypropylene matrix |
|---|
| Avtorji: | ID Bek, Marko (Avtor)
ID Aulova, Alexandra (Avtor)
ID Pušnik Črešnar, Klementina (Avtor)
ID Matkovič, Sebastjan (Avtor)
ID Kalin, Mitjan (Avtor)
ID Slemenik Perše, Lidija (Avtor) |
|---|
| Datoteke: |  Long-Term_Creep_Compliance_of_Wood_Po-Bek-2022.pdf (5,62 MB)
MD5: 9EE3919B90A92F32162964EB8DA528D1
 https://www.mdpi.com/2073-4360/14/13/2539
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Neat (NPP) and recycled (RPP) polypropylene matrix materials were used to prepare wood–polymer composites with untreated wood fibers up to 40 wt.%. Long-term creep properties obtained through the time-temperature superposition showed superior creep resistance of composites with NPP matrix. In part, this is attributed to their higher crystallinity and better interfacial adhesion caused by the formation of a transcrystalline layer. This difference resulted in up to 25% creep compliance reduction of composites with NPP matrix compared to composites with recycled (RPP) polypropylene matrix, which does not form a transcrystalline layer between the fibers and polymer matrix. Despite the overall inferior creep performance of composites with RPP matrix, from the 20 wt.% on, the creep compliance is comparable and even surpasses the creep performance of unfilled NPP matrix and can be a promising way to promote sustainability. |
|---|
| Ključne besede: | lesno-polimerni kompoziti, lezenje, vzdržljivost, les, recikliranje, wood–polymer composites, creep, durability, wood, recycling |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 09.06.2022 |
|---|
| Datum sprejetja članka: | 17.06.2022 |
|---|
| Datum objave: | 22.06.2022 |
|---|
| Založnik: | MDPI AG |
|---|
| Leto izida: | 2022 |
|---|
| Št. strani: | 19 str. |
|---|
| Številčenje: | Vol. 14, iss. 13 (2539) |
|---|
| PID: | 20.500.12556/DKUM-82068  |
|---|
| UDK: | 677.017:631.571 |
|---|
| COBISS.SI-ID: | 113069315 |
|---|
| DOI: | 10.3390/polym14132539 |
|---|
| ISSN pri članku: | 2073-4360 |
|---|
| Avtorske pravice: | © 2022 by the authors |
|---|
| Datum objave v DKUM: | 16.08.2023 |
|---|
| Število ogledov: | 500 |
|---|
| Število prenosov: | 502 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
