| Naslov: | Fabrication and mechanical testing of the uniaxial graded auxetic damper |
|---|
| Avtorji: | ID Al-Rifaie, Hasan (Avtor)
ID Novak, Nejc (Avtor)
ID Vesenjak, Matej (Avtor)
ID Ren, Zoran (Avtor)
ID Sumelka, Wojciech (Avtor) |
|---|
| Datoteke: |  materials-15-00387-v2.pdf (7,31 MB)
MD5: 18863DCD93470CE7EBE9E483486633DC
 https://www.mdpi.com/1996-1944/15/1/387
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Auxetic structures can be used as protective sacrificial solutions for impact protection with lightweight and excellent energy-dissipation characteristics. A recently published and patented shock-absorbing system, namely, Uniaxial Graded Auxetic Damper (UGAD), proved its efficiency through comprehensive analytical and computational analyses. However, the authors highlighted the necessity for experimental testing of this new damper. Hence, this paper aimed to fabricate the UGAD using a cost-effective method and determine its load–deformation properties and energy-absorption potential experimentally and computationally. The geometry of the UGAD, fabrication technique, experimental setup, and computational model are presented. A series of dog-bone samples were tested to determine the exact properties of aluminium alloy (AW-5754, T-111). A simplified (elastic, plastic with strain hardening) material model was proposed and validated for use in future computational simulations. Results showed that deformation pattern, progressive collapse, and force–displacement relationships of the manufactured UGAD are in excellent agreement with the computational predictions, thus validating the proposed computational and material models. |
|---|
| Ključne besede: | uniaxial graded auxetic damper, energy absorber, mechanical properties, finite element method, explicit solver |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 30.10.2021 |
|---|
| Datum sprejetja članka: | 25.12.2021 |
|---|
| Datum objave: | 05.01.2022 |
|---|
| Založnik: | MDPI AG |
|---|
| Leto izida: | 2022 |
|---|
| Št. strani: | 15 str. |
|---|
| Številčenje: | Vol. 15, iss. 1 |
|---|
| PID: | 20.500.12556/DKUM-84823  |
|---|
| UDK: | 539.3:620.1 |
|---|
| COBISS.SI-ID: | 92179459 |
|---|
| DOI: | 10.3390/ma15010387 |
|---|
| ISSN pri članku: | 1996-1944 |
|---|
| Avtorske pravice: | © 2022 by the authors |
|---|
| Datum objave v DKUM: | 28.07.2023 |
|---|
| Število ogledov: | 680 |
|---|
| Število prenosov: | 866 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
