| Naslov: | Razvoj modela za spremljanje degradacije površine materiala med dinamičnim obremenjevanjem : doctoral disertation |
|---|
| Avtorji: | ID Milković, Marijana (Avtor)
ID Gubeljak, Nenad (Mentor) Več o mentorju... 
ID Đonlagić, Denis (Komentor) |
|---|
| Datoteke: |  DOK_Milkovic_Marijana_2024.pdf (10,61 MB)
MD5: D90239C28147C90D1AE1CB6465575CBE
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Doktorsko delo/naloga |
|---|
| Tipologija: | 2.08 - Doktorska disertacija |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | The study focuses on the behavior of the AA7075-T6 material, widely used in the aerospace industry, under dynamic loadings. The material undergoes processing, including cold rolling and stretching, resulting in residual stress compressive stresses on its surface. The research centers on monitoring changes in the surface condition during dynamic loaidngs using Fiber Bragg Grating (FBG) sensors and numerical simulations.
The dissertation includes experimental testing of AA 7075-T6 material samples, numerical simulations of optical fiber responses to tensile loads, and an investigation of surface condition changes using techniques such as focused ion beam engraving and scanning electron microscope observation.
The study has shown that the surface condition of the material changes even under low dynamic loads, including variations in surface roughness, residual stresses, and FBG response. Despite low load levels, changes in FBG sensor spectra are observable.
The dissertation concludes that the surface condition of the material changes during dynamic loadings, detectable through FBG sensors. It underscores the effectiveness of FBG sensors in monitoring stress levels throughout the material’s service life, particularly on the side lobes of the spectral response.
In summary, the research on the dynamic behavior of the AA7075-T6 alloy offers valuable insight into surface condition changes that can impact the integrity and durability of materials in the aerospace industry. |
|---|
| Ključne besede: | fatigue, high cycle load, Fiber Bragg grating |
|---|
| Kraj izida: | Maribor |
|---|
| Kraj izvedbe: | Maribor |
|---|
| Založnik: | [M. Milković] |
|---|
| Leto izida: | 2023 |
|---|
| Št. strani: | XVIII, 101 str. |
|---|
| PID: | 20.500.12556/DKUM-85854 |
|---|
| UDK: | 620.178.2:621.791.053(043.3) |
|---|
| COBISS.SI-ID: | 182164227 |
|---|
| Datum objave v DKUM: | 05.01.2024 |
|---|
| Število ogledov: | 696 |
|---|
| Število prenosov: | 88 |
|---|
| Metapodatki: |    |
|---|
| Področja: | KTFMB - FS
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
