Design investigation of electromechanical generator for energy harvesting

Smolar, Nejc; Virtič, Peter

| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Prva stran > Izpis gradiva

Izpis gradiva

Naslov:	Design investigation of electromechanical generator for energy harvesting
Avtorji:	ID Smolar, Nejc (Avtor) ID Virtič, Peter (Avtor)
Datoteke:	Design_investigation_of_electromechanical_generator_Smolar_2019.pdf (1,25 MB) MD5: 7F3F67263230E0283414BEBE7EA7289D https://www.e3s-conferences.org/articles/e3sconf/abs/2019/42/e3sconf_asee18_00079/e3sconf_asee18_00079.html
Jezik:	Angleški jezik
Vrsta gradiva:	Znanstveno delo
Tipologija:	1.08 - Objavljeni znanstveni prispevek na konferenci
Organizacija:	FE - Fakulteta za energetiko
Opis:	In this paper designs of electromechanical generator for low frequency energy harvesting have been investigated. Simulation with finite element method has been conducted in order to determine highest output voltage of simple and robust generator consisting of permanent magnet and windings. In first part round magnets have been used in spherical and cylindrical form, benefiting from their ability to roll through winding with almost no mechanical friction inducing voltage in into windings. In the second part spindles with smaller radius than circumference of magnet were added to axis to increase rotational velocity of magnet in ambition to further increase induced voltage. As a result of added spindles and use of different magnet shapes length of winding turn varied and resistance of winding varied with it. To ensure similar conditions, windings have been recalculated to lowest electrical resistance using same fill factor, resulting in less winding turns decreasing induced voltage. In case of same kinetic energy input, higher rotational velocity combined with lower inertia produced higher induced voltage output.
Ključne besede:	electromechanical generator, energy harvesting
Status publikacije:	Objavljeno
Verzija publikacije:	Objavljena publikacija
Datum objave:	24.09.2019
Založnik:	EDP Sciences
Leto izida:	2019
Št. strani:	Str. 1-8
Številčenje:	Letn. 116
PID:	20.500.12556/DKUM-86483
UDK:	620.9
COBISS.SI-ID:	1024361052
DOI:	10.1051/e3sconf/201911600079
Datum objave v DKUM:	05.12.2023
Število ogledov:	537
Število prenosov:	33
Metapodatki:
Področja:	Ostalo
:	Kopiraj citat

Skupna ocena:	(0 glasov)
Vaša ocena:	Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:

Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del monografije

Naslov:	International conference on advances in energy systems and environmental engineering (ASEE19), Wrocław, June 9-12, 2019
Uredniki:	Marderos Ara Sayegh
Kraj izida:	Wroclaw
Založnik:	ASEE
Leto izida:	2019
COBISS.SI-ID:	18080515
Naslov zbirke:	E3S Web of conferences
Številčenje v zbirki:	ǂVol. ǂ116
ISSN zbirke:	2267-1242

Licence

Licenca:	CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna

Povezava:	http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:	To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:	24.09.2019

Sekundarni jezik

Jezik:	Slovenski jezik
Ključne besede:	elektromagnetski generator, kopičelje energije

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)

0 - 0 / 0

Ni komentarjev!

Nazaj