| Naslov: | Lift and drag coefficients for different magnus rotor types |
|---|
| Avtorji: | ID Pezdevšek, Marko (Avtor) |
| Datoteke: | Lift_and_drag_coefficients_Pezdevsek_2019.pdf (1,17 MB) MD5: F27FD9A79A2EB8B4B54E4348B44CC39A
https://www.fe.um.si/e-jet/38-2019/1741-september-2019.html
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FE - Fakulteta za energetiko
|
|---|
| Opis: | In this paper, the results of numerical simulations for various Magnus rotor configurations are presented. For each configuration, a blocked structured mesh was designed in ICEM CFD. Numerical simulations were conducted using Ansys CFX. The influence of the aspect ratio on the lift and drag coefficients depending on the speed ratio was investigated, as was the influence of endplates on a Magnus rotor. From the obtained results, it was concluded that adding endplates to a Magnus rotor increases the lift and drag coefficients. |
|---|
| Ključne besede: | Magnus effect, lift coefficient, drag coefficient, Ansys CFX, endplates, aspect ratio |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 01.09.2019 |
|---|
| Založnik: | Fakulteta za energetiko Univerze v Mariboru |
|---|
| Leto izida: | 2019 |
|---|
| Št. strani: | Str. 41-49 |
|---|
| Številčenje: | Letn. 12, Št. 2 |
|---|
| PID: | 20.500.12556/DKUM-86490  |
|---|
| UDK: | 621-159.3 |
|---|
| COBISS.SI-ID: | 1024366172  |
|---|
| ISSN pri članku: | 1855-5748 |
|---|
| Datum objave v DKUM: | 05.12.2023 |
|---|
| Število ogledov: | 618 |
|---|
| Število prenosov: | 96 |
|---|
| Metapodatki: |  |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |