| Naslov: | Prediction of the form of a hardened metal workpiece during the straightening process |
|---|
| Avtorji: | ID Peršak, Tadej (Avtor)
ID Hernavs, Jernej (Avtor)
ID Vuherer, Tomaž (Avtor)
ID Belšak, Aleš (Avtor)
ID Klančnik, Simon (Avtor) |
|---|
| Datoteke: |  Persak-2023-Prediction_of_the_Form_of_a_Harden.pdf (10,52 MB)
MD5: CD6491FDD7C60EDD5D721D753EF2E97D
 https://doi.org/10.3390/su15086408
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | In industry, metal workpieces are often heat-treated to improve their mechanical properties, which leads to unwanted deformations and changes in their geometry. Due to their high hardness (60 HRC or more), conventional bending and rolling straightening approaches are not effective, as a failure of the material occurs. The aim of the research was to develop a predictive model that predicts the change in the form of a hardened workpiece as a function of the arbitrary set of strikes that deform the surface plastically. A large-scale laboratory experiment was carried out in which a database of 3063 samples was prepared, based on the controlled application of plastic deformations on the surface of the workpiece and high-resolution capture of the workpiece geometry. The different types of input data, describing, on the one hand, the performed plastic surface deformations on the workpieces, and on the other hand the point cloud of the workpiece geometry, were combined appropriately into a form that is a suitable input for a U-Net convolutional neural network. The U-Net model’s performance was investigated using three statistical indicators. These indicators were: relative absolute error (RAE), root mean squared error (RMSE), and relative squared error (RSE). The results showed that the model had excellent prediction performance, with the mean values of RMSE less than 0.013, RAE less than 0.05, and RSE less than 0.004 on test data. Based on the results, we concluded that the proposed model could be a useful tool for designing an optimal straightening strategy for high-hardness metal workpieces. Our results will open the doors to implementing digital sustainability techniques, since more efficient handling will result in fewer subsequent heat treatments and shorter handling times. An important goal of digital sustainability is to reduce electricity consumption in production, which this approach will certainly do. |
|---|
| Ključne besede: | sustraightening process, hardened workpiece, manufacturing, U-Net convolutional neural network, modeling, point cloud, digital sustainability |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 12.03.2023 |
|---|
| Datum sprejetja članka: | 07.04.2023 |
|---|
| Datum objave: | 09.04.2023 |
|---|
| Založnik: | MDPI |
|---|
| Leto izida: | 2023 |
|---|
| Št. strani: | Str. 1-19 |
|---|
| Številčenje: | Letn. 15, Št. 8, št. članka 6408 |
|---|
| PID: | 20.500.12556/DKUM-87945  |
|---|
| UDK: | 621.91:007.52 |
|---|
| COBISS.SI-ID: | 148595971 |
|---|
| DOI: | 10.3390/su15086408 |
|---|
| ISSN pri članku: | 2071-1050 |
|---|
| Datum objave v DKUM: | 02.04.2024 |
|---|
| Število ogledov: | 454 |
|---|
| Število prenosov: | 34 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
