| Naslov: | Advance analysis of the obtained recycled materials from used disposable surgical masks |
|---|
| Avtorji: | ID Erjavec, Alen (Avtor)
ID Volmajer Valh, Julija (Avtor)
ID Hribernik, Silvo (Avtor)
ID Kraševac Glaser, Tjaša (Avtor)
ID Fras Zemljič, Lidija (Avtor)
ID Vuherer, Tomaž (Avtor)
ID Neral, Branko (Avtor)
ID Brunčko, Mihael (Avtor) |
|---|
| Datoteke: |  polymers-16-00935.pdf (8,08 MB)
MD5: C1C21EC997A945FB8AA89B4F9AADB023
 https://www.mdpi.com/2073-4360/16/7/935
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
FERI - Fakulteta za elektrotehniko, računalništvo in informatiko
|
|---|
| Opis: | The production of personal protective equipment (PPE) has increased dramatically in recent years, not only because of the pandemic, but also because of stricter legislation in the field of Employee Protection. The increasing use of PPE, including disposable surgical masks (DSMs), is putting additional pressure on waste collectors. For this reason, it is necessary to find high-quality solutions for this type of waste. Mechanical recycling is still the most common type of recycling, but the recyclates are often classified as low-grade materials. For this reason, a detailed analysis of the recyclates is necessary. These data will help us to improve the properties and find the right end application that will increase the value of the materials. This work represents an extended analysis of the recyclates obtained from DSMs, manufactured from different polymers. Using surface and morphology tests, we have gained insights into the distribution of different polymers in polymer blends and their effects on mechanical and surface properties. It was found that the addition of ear loop material to the PP melt makes the material tougher. In the polymer blends obtained, PP and PA 6 form the surface (affects surface properties), while PU and PET are distributed mainly inside the injection-molded samples. |
|---|
| Ključne besede: | mechanical recycling, disposable surgical mask, morphology, surface properties, mechanical properties, nonwoven materials, PPE |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 29.02.2024 |
|---|
| Datum sprejetja članka: | 26.03.2024 |
|---|
| Datum objave: | 29.03.2024 |
|---|
| Založnik: | MDPI |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | 21 str. |
|---|
| Številčenje: | Vol. 16, iss. 7, [article no.] 935 |
|---|
| PID: | 20.500.12556/DKUM-88095  |
|---|
| UDK: | 677.017:544.72 |
|---|
| COBISS.SI-ID: | 191884291 |
|---|
| DOI: | 10.3390/polym16070935 |
|---|
| ISSN pri članku: | 2073-4360 |
|---|
| Avtorske pravice: | © 2024 by the authors |
|---|
| Datum objave v DKUM: | 09.04.2024 |
|---|
| Število ogledov: | 407 |
|---|
| Število prenosov: | 33 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
