| Naslov: | Design and initial testing of a maize cob collection system |
|---|
| Avtorji: | ID Dolšak, Bojan (Avtor)
ID Breznik, Anita (Avtor)
ID Kaučič, Klemen (Avtor)
ID Imenšek, Nataša (Avtor)
ID Marčec, Marko (Avtor)
ID Gselman, Peter (Avtor)
ID Humar, Jani (Avtor)
ID Krajnc, Mitja (Avtor) |
|---|
| Datoteke: |  8218-29607-1-PB.pdf (1,11 MB)
MD5: 9DE8218B6E53EDCA14F9553B027BF239
 https://www.ijabe.org/index.php/ijabe/article/view/8218
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Maize cobs are valuable plant residues that can be used for many different purposes, including as a renewable energy source. Despite their value, maize cobs are still underutilized, mainly because people are not aware of their potential and harvesting techniques for their collection are still being developed. Therefore, this research focused on finding the most suitable energy- and time- efficient method for mechanical collection of maize cobs. Upgrading the combine harvester with an additional hopper proved to be the most promising solution, as it allows harvesting and storage of maize grain and maize cobs in one pass, while the harvesting time remains almost the same and the maize cobs are of good quality, as they do not fall on the field. A prototype with enlarged openings in the straw walkers, an additional grab container for maize cobs, a transport auger, a transport cleaning fan with built-in knives, a transport tube and some other assemblies was fabricated and used in practice. The first test results are very encouraging (94.4%-96.0% purity of maize cobs) and the system has been patented as a promising solution, especially in times when the environmental sustainability of the planet and energy independence are becoming increasingly important. |
|---|
| Ključne besede: | maize cobs, utilization, mechanical harvesting, combine harvester upgrade |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 06.03.2023 |
|---|
| Datum sprejetja članka: | 16.04.2024 |
|---|
| Datum objave: | 01.06.2024 |
|---|
| Založnik: | Association of Overseas Chinese Agricultural, Biological and Food Engineers (AOCABFE) & Chinese Society of Agricultural Engineering (CSAE) |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | str. 108-114 |
|---|
| Številčenje: | Vol. 17, No. 3 |
|---|
| PID: | 20.500.12556/DKUM-89600  |
|---|
| UDK: | 631.355:633.15 |
|---|
| COBISS.SI-ID: | 202893059 |
|---|
| DOI: | 10.25165/j.ijabe.20241703.8218 |
|---|
| ISSN pri članku: | 1934-6352 |
|---|
| Datum objave v DKUM: | 26.07.2024 |
|---|
| Število ogledov: | 266 |
|---|
| Število prenosov: | 64 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
