| Naslov: | Suitability of test procedures for determining the compatibility of seal materials with ionic hydraulic fluids |
|---|
| Avtorji: | ID Lovrec, Darko (Avtor)
ID Tič, Vito (Avtor) |
|---|
| Datoteke: |  polymers-16-02551.pdf (3,07 MB)
MD5: 9C7B5B714D8E80CA2EC89731C13D3DC0
 https://www.mdpi.com/2073-4360/16/18/2551
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | The compatibility of seal materials with the working fluid is crucial for the flawless, energysaving, environmentally sustainable, and safe operation of any technical system. This is especially
true for hydraulic systems operating under high operating pressure. The problem of materials
compatibility comes into play when either a new type of seal material or a new type of fluid comes
into use. The paper discusses the research findings regarding material compatibility testing of new
high-tech ionic hydraulic fluids with commonly used seal materials. Due to the completely different
chemical composition of these new fluids compared to the classical mineral-based oil, for these fluids,
there are no standardized testing procedures. In these cases, we can only lean on the Standards
that apply to classical fluids, which can lead to incorrect results. In the forefront of the paper is the
discrepancy between the results obtained by the standardized test, and the test under real operating
conditions. FKM, an excellent material for seals, proved to be the most suitable in the case of using
ionic hydraulic fluid, according to a standardized test. However, it failed in the comparison test
under real operating conditions, as the cylinder leaked. NBR seals proved to be a better solution.
|
|---|
| Ključne besede: | ionic hydraulic fluids, seal material compatibility, static and dynamic test, comparison of results, differences, test suitability |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 29.07.2024 |
|---|
| Datum sprejetja članka: | 08.09.2024 |
|---|
| Datum objave: | 10.09.2024 |
|---|
| Založnik: | MDPI |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | 12 str. |
|---|
| Številčenje: | Vol. 16, iss. 18, [atricle no.] 2551 |
|---|
| PID: | 20.500.12556/DKUM-90602  |
|---|
| UDK: | 621.22:620.1 |
|---|
| COBISS.SI-ID: | 207019011 |
|---|
| DOI: | 10.3390/polym16182551 |
|---|
| ISSN pri članku: | 2073-4360 |
|---|
| Avtorske pravice: | © 2024 by the authors |
|---|
| Datum objave v DKUM: | 10.09.2024 |
|---|
| Število ogledov: | 168 |
|---|
| Število prenosov: | 41 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
