| Naslov: | Comparative study of different polymeric binders in electrochemical CO reduction |
|---|
| Avtorji: | ID Galbicsek, Noémi V. (Avtor)
ID Kormányos, Attila (Avtor)
ID Samu, Gergely Ferenc (Avtor)
ID Ayyub, Mohd M. (Avtor)
ID Kotnik, Tomaž (Avtor)
ID Kovačič, Sebastijan (Avtor)
ID Janáky, Csaba (Avtor)
ID Endrődi, Balázs (Avtor) |
|---|
| Datoteke: |  galbicsek-et-al-2024-comparative-study-of-different-polymeric-binders-in-electrochemical-co-reduction.pdf (3,55 MB)
MD5: 1102F2B65DBD40E38066518A9A6E8BBB
 https://pubs.acs.org/doi/10.1021/acs.energyfuels.4c04058
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FKKT - Fakulteta za kemijo in kemijsko tehnologijo
|
|---|
| Opis: | Electrochemical reduction of carbon monoxide offers a possible route to produce valuable chemicals (such as acetate, ethanol or ethylene) from CO2 in two consecutive electrochemical reactions. Such deeply reduced products are formed via the transfer of 4–6 electrons per CO molecule. Assuming similar-sized CO2 and CO electrolyzers, 2–3-times larger current densities are required in the latter case to match the molar fluxes. Such high reaction rates can be ensured by tailoring the structure of the gas diffusion electrodes. Here, the structure of the cathode catalyst layer was systematically varied using different polymeric binders to achieve high reaction rates. Simple linear polymers, bearing the same backbone but different functional groups were compared to highlight the role of different structural motifs. The comparison was also extended to simple linear, partially fluorinated polymers. Interestingly, in some cases similar results were obtained as with the current state-of-the-art binders. Using different surface-wetting characterization techniques, we show that the hydrophobicity of the catalyst layer─provided by the binder─ is a prerequisite for high-rate CO electrolysis. The validity of this notion was demonstrated by performing CO electrolysis experiments at high current density (1 A cm–2) for several hours using PVDF as the catalyst binder. |
|---|
| Ključne besede: | electrochemical CO reduction, polymeric binders, carbon monoxide |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 21.08.2024 |
|---|
| Datum sprejetja članka: | 23.10.2024 |
|---|
| Datum objave: | 05.11.2024 |
|---|
| Založnik: | ACS Publications |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | str. 22307–22314 |
|---|
| Številčenje: | Vol. 38, iss. 22 |
|---|
| PID: | 20.500.12556/DKUM-91775  |
|---|
| UDK: | 544.5/.6 |
|---|
| COBISS.SI-ID: | 217480195 |
|---|
| DOI: | 10.1021/acs.energyfuels.4c04058 |
|---|
| ISSN pri članku: | 1520-5029 |
|---|
| Avtorske pravice: | © 2024 The Authors |
|---|
| Datum objave v DKUM: | 04.02.2025 |
|---|
| Število ogledov: | 132 |
|---|
| Število prenosov: | 11 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
