| Naslov: | Enhancing manufacturing precision: Leveraging motor currents data of computer numerical control machines for geometrical accuracy prediction through machine learning |
|---|
| Avtorji: | ID Berus, Lucijano (Avtor)
ID Hernavs, Jernej (Avtor)
ID Potočnik, David (Avtor)
ID Šket, Kristijan (Avtor)
ID Ficko, Mirko (Avtor) |
|---|
| Datoteke: |  sensors-25-00169_(1).pdf (4,44 MB)
MD5: D88C43CFCA902089A3CB8B7A0CB45F50
 https://www.mdpi.com/1424-8220/25/1/169
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Direct verification of the geometric accuracy of machined parts cannot be performed simultaneously with active machining operations, as it usually requires subsequent inspection with measuring devices such as coordinate measuring machines (CMMs) or optical 3D scanners. This sequential approach increases production time and costs. In this study, we propose a novel indirect measurement method that utilizes motor current data from the controller of a Computer Numerical Control (CNC) machine in combination with machine learning algorithms to predict the geometric accuracy of machined parts in real-time. Different machine learning algorithms, such as Random Forest (RF), k-nearest neighbors (k-NN), and Decision Trees (DT), were used for predictive modeling. Feature extraction was performed using Tsfresh and ROCKET, which allowed us to capture the patterns in the motor current data corresponding to the geometric features of the machined parts. Our predictive models were trained and validated on a dataset that included motor current readings and corresponding geometric measurements of a mounting rail later used in an engine block. The results showed that the proposed approach enabled the prediction of three geometric features of the mounting rail with an accuracy (MAPE) below 0.61% during the learning phase and 0.64% during the testing phase. These results suggest that our method could reduce the need for post-machining inspections and measurements, thereby reducing production time and costs while maintaining required quality standards |
|---|
| Ključne besede: | smart production machines, data-driven manufacturing, machine learning algorithms, CNC controller data, geometrical accuracy |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 27.11.2024 |
|---|
| Datum sprejetja članka: | 16.12.2024 |
|---|
| Datum objave: | 31.12.2024 |
|---|
| Založnik: | MDPI |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | 19 str. |
|---|
| Številčenje: | Vol. 25, iss. 1, [article no.] 169 |
|---|
| PID: | 20.500.12556/DKUM-91985  |
|---|
| UDK: | 658.5:004.6 |
|---|
| COBISS.SI-ID: | 225665795 |
|---|
| DOI: | 10.3390/s25010169 |
|---|
| ISSN pri članku: | 1424-8220 |
|---|
| Avtorske pravice: | © 2024 by the authors |
|---|
| Datum objave v DKUM: | 10.03.2025 |
|---|
| Število ogledov: | 150 |
|---|
| Število prenosov: | 20 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
