| Naslov: | Recent trends in the synthesis of monomers for furanoate polyesters and their nanocomposites’ fabrication as a sustainable packaging material |
|---|
| Avtorji: | ID Stanley, Johan (Avtor)
ID Fras Zemljič, Lidija (Avtor)
ID Lambropoulou, Dimitra A. (Avtor)
ID Bikiaris, Dimitrios (Avtor) |
|---|
| Datoteke: |  sustainability-16-08632.pdf (4,54 MB)
MD5: 07FA8724275332DF58CB7BF3A43DA0B3
 https://www.mdpi.com/2071-1050/16/19/8632
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Furanoate polyesters are an extremely promising new class of materials for packaging applications, particularly furanoate-based nanocomposites, which have gained a high interest level in research and development in both academia and industries. The monomers utilised for the synthesis of furanoate-based polyesters were derived from lignocellulosic biomass, which is essential for both eco-friendliness and sustainability. Also, these polyesters have a lower carbon footprint compared to fossil-based plastics, contributing to greenhouse gas reduction. The furanoate-based nanocomposites exhibit enhanced performance characteristics, such as high thermal stability, excellent mechanical strength, superior barrier resistance, and good bacteriostatic rate, making them suitable for a wide range of industrial applications, especially for food-packaging applications. This paper reviews the recent trends in the synthesis routes of monomers, such as the various catalytic activities involved in the oxidation of 5(hydroxymethyl)furfural (HMF) into 2,5-furandicarboxylic acid (FDCA) and its ester, dimethyl furan-2,5-dicarboxylate (DMFD). In addition, this review explores the fabrication of different furanoate-based nanocomposites prepared by in situ polymerization, by melt mixing or solvent evaporation methods, and by using different types of nanoparticles to enhance the overall material properties of the resulting nanocomposites. Emphasis was given to presenting the effect of these nanoparticles on the furanoate polyester’s properties. |
|---|
| Ključne besede: | 2, 5-furandicarboxylic acid, dimethyl furan-2, 5-dicarboxylat, furanoate polyesters, furanoate nanocomposites, thermal properties, mechanical properties, antibacterial properties, sustainable packaging |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 10.09.2024 |
|---|
| Datum sprejetja članka: | 03.10.2024 |
|---|
| Datum objave: | 05.10.2024 |
|---|
| Založnik: | MDPI |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | 22 str. |
|---|
| Številčenje: | Vol. 16, iss. 19, [article no.] 8632 |
|---|
| PID: | 20.500.12556/DKUM-91995  |
|---|
| UDK: | 543.2/.9:66 |
|---|
| COBISS.SI-ID: | 222853635 |
|---|
| DOI: | 10.3390/su16198632 |
|---|
| ISSN pri članku: | 2071-1050 |
|---|
| Avtorske pravice: | © 2024 by the authors |
|---|
| Datum objave v DKUM: | 10.03.2025 |
|---|
| Število ogledov: | 159 |
|---|
| Število prenosov: | 18 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
