| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Izpis gradiva Pomoč

Naslov:Application and comparison of non-contact vibration monitoring methods for concrete railway sleepers
Avtorji:ID Kovačič, Boštjan (Avtor)
ID Toplak, Sebastian (Avtor)
ID Paar, Rinaldo (Avtor)
ID Lubej, Samo (Avtor)
Datoteke:.pdf applsci-12-12875.pdf (6,49 MB)
MD5: 02BD2A9DC7F9975CBF856451AC12EAA5
 
URL https://www.mdpi.com/2076-3417/12/24/12875
 
Jezik:Angleški jezik
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FGPA - Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo
Opis:This paper describes the non-contact vibration monitoring of prestressed reinforced concrete railway sleepers. The monitoring was carried out using physical measuring equipment consisting of a seismograph and geophones, a robotic total station (RTS) and scanning laser Doppler vibrometry (SLDV) equipment. Measurements of the dynamic response of sleepers to the dynamic loading induced by the running of train sets provides data that give an insight into the actual state of the sleeper structure at the moment when it is most stressed. The main objective of the study was to identify the most appropriate form of monitoring to monitor events related to the occurrence of cracks in the rail sill, which can also be caused by the impact of vibration. As is well-known, monitoring the dynamic response of railway sleepers is very important for the sustainable management and maintenance of railway lines. The vibration analysis was carried out in the field on the Ormož–Ptuj section of the railway line, in Velika Nedelja and in the laboratory of the UM FGPA, where the vibration was simulated using a hydraulic kit with a static and pulsed force of 100 kN. Several cycles of measurement were carried out and the results were compared with the results of the field monitoring. The vibration parameters measured for the concrete sleepers are necessary to develop a realistic dynamic model of the railway line, which will be able to predict its response to impact loads and the possible occurrence of damage, as has recently been observed for concrete sleepers in several European Union countries.
Ključne besede:monitoring, measurement equipment, railway line, displacements, deformations
Status publikacije:Objavljeno
Verzija publikacije:Objavljena publikacija
Poslano v recenzijo:14.10.2022
Datum sprejetja članka:08.12.2022
Datum objave:15.12.2022
Založnik:MDPI
Leto izida:2022
Št. strani:str. 1-19
Številčenje:issue 24, Vol. 12
PID:20.500.12556/DKUM-92025 Novo okno
UDK:620.1/.2
COBISS.SI-ID:134454787 Novo okno
DOI:10.3390/app122412875 Novo okno
ISSN pri članku:2076-3417
Avtorske pravice:© 2022 by the authors
Datum objave v DKUM:12.03.2025
Število ogledov:237
Število prenosov:17
Metapodatki:XML DC-XML DC-RDF
Področja:Ostalo
:
Kopiraj citat
  
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:Bookmark and Share



Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del revije

Naslov:Applied sciences
Skrajšan naslov:Appl. sci.
Založnik:MDPI
ISSN:2076-3417
COBISS.SI-ID:522979353 Novo okno

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:nadzor, spremljanje, oprema za merjenje, železniška proga, premiki, deformacije


Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj
Logotipi partnerjev Univerza v Mariboru Univerza v Ljubljani Univerza na Primorskem Univerza v Novi Gorici