| Naslov: | Strain rate-dependent compressive properties of bulk cylindrical 3D-printed samples from 316L stainless steel |
|---|
| Avtorji: | ID Neuhauserova, Michaela (Avtor)
ID Koudelka, Petr (Avtor)
ID Fíla, Tomáš (Avtor)
ID Falta, Jan (Avtor)
ID Rada, Václav (Avtor)
ID Sleichrt, Jan (Avtor)
ID Zlámal, Petr (Avtor)
ID Mauko, Anja (Avtor)
ID Jiroušek, Ondřej (Avtor) |
|---|
| Datoteke: |  materials-15-00941.pdf (10,71 MB)
MD5: 185A7407989EF4B0205028357468111D
 https://www.mdpi.com/1996-1944/15/3/941
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | The main aim of the study was to analyse the strain rate sensitivity of the compressive
deformation response in bulk 3D-printed samples from 316L stainless steel according to the printing
orientation. The laser powder bed fusion (LPBF) method of metal additive manufacturing was
utilised for the production of the samples with three different printing orientations: 0◦
, 45◦
, and 90◦
.
The specimens were experimentally investigated during uni-axial quasi-static and dynamic loading.
A split Hopkinson pressure bar (SHPB) apparatus was used for the dynamic experiments. The
experiments were observed using a high-resolution (quasi-static loading) or a high-speed visible-light
camera and a high-speed thermographic camera (dynamic loading) to allow for the quantitative and
qualitative analysis of the deformation processes. Digital image correlation (DIC) software was used
for the evaluation of displacement fields. To assess the deformation behaviour of the 3D-printed
bulk samples and strain rate related properties, an analysis of the true stress–true strain diagrams
from quasi-static and dynamic experiments as well as the thermograms captured during the dynamic
loading was performed. The results revealed a strong strain rate effect on the mechanical response of
the investigated material. Furthermore, a dependency of the strain-rate sensitivity on the printing
orientation was identified. |
|---|
| Ključne besede: | 3D printing, laser powder bed fusion, 316L stainless steel, printing direction, split Hopkinson pressure bar |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 21.12.2021 |
|---|
| Datum sprejetja članka: | 17.01.2022 |
|---|
| Datum objave: | 26.01.2022 |
|---|
| Založnik: | MDPI AG |
|---|
| Leto izida: | 2022 |
|---|
| Št. strani: | 15 str. |
|---|
| Številčenje: | Vol. 15, iss. 3 (941) |
|---|
| PID: | 20.500.12556/DKUM-92194  |
|---|
| UDK: | 539.3:669.2/.8 |
|---|
| COBISS.SI-ID: | 98577667 |
|---|
| DOI: | 10.3390/ma15030941 |
|---|
| ISSN pri članku: | 1996-1944 |
|---|
| Avtorske pravice: | © 2022 by the authors |
|---|
| Datum objave v DKUM: | 20.03.2025 |
|---|
| Število ogledov: | 164 |
|---|
| Število prenosov: | 13 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
