| Naslov: | Development of a new AuCuZnGe alloy and determination of its corrosion properties |
|---|
| Avtorji: | ID Rudolf, Rebeka (Avtor)
ID Majerič, Peter (Avtor)
ID Lazić, Vojkan (Avtor)
ID Grgur, Branimir (Avtor) |
|---|
| Datoteke: |  metals-12-01284.pdf (2,78 MB)
MD5: 129607B320A8D7B7E116BC4A2579A633
 https://www.mdpi.com/2075-4701/12/8
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | In this paper, we present the idea and development of a new gold-copper-zinc-germanium
(AuCuZnGe) alloy, which is related to the method of production and research of its key properties, so
that the new Au alloy could be used for jewelry production and in dental technology. The research
design was associated with the determination of appropriate chemical composition, manufacturing
technology, and performing the characterization. Melting and casting technologies were used to cast
the AuCuZnGe alloy while rolling was used to prepare the cylinders and cutting to make square
plates with a = 10 mm and thickness of 1 mm. Such plates were provided for corrosion testing.
Observation of the plate0
s microstructure was performed with Scanning Electron Microscopy (SEM)
equipped by Energy-Dispersive X-ray spectrometry (EDS) and X-ray diffraction (XRD). Corrosion
testing involved performing the following measurements: Polarization, the open circuit potentials,
and linear polarization resistance. Based on the SEM, EDS, XRD, and results of corrosion testing it can
be concluded that the new AuCuZnGe alloy possesses high corrosion stability and can be classified
as a high noble alloy. |
|---|
| Ključne besede: | gold alloy, germanium, production, characterization, corrosion properties |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 28.06.2022 |
|---|
| Datum sprejetja članka: | 27.07.2022 |
|---|
| Datum objave: | 30.07.2022 |
|---|
| Založnik: | MDPI AG |
|---|
| Leto izida: | 2022 |
|---|
| Št. strani: | Str. 1-11 |
|---|
| Številčenje: | Vol. 12, iss. 8 (1284 Spec. iss.) |
|---|
| PID: | 20.500.12556/DKUM-92236  |
|---|
| UDK: | 669.21:620.3 |
|---|
| COBISS.SI-ID: | 117064195 |
|---|
| DOI: | 10.3390/met12081284 |
|---|
| ISSN pri članku: | 2075-4701 |
|---|
| Avtorske pravice: | © 2022 by the authors |
|---|
| Datum objave v DKUM: | 24.03.2025 |
|---|
| Število ogledov: | 150 |
|---|
| Število prenosov: | 13 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
