| Naslov: | A computational model for analysing the wear behaviour of polymer gears |
|---|
| Avtorji: | ID Ignatijev, Aljaž (Avtor)
ID Glodež, Srečko (Avtor)
ID Belšak, Aleš (Avtor)
ID Borovinšek, Matej (Avtor) |
|---|
| Datoteke: |  1-s2.0-S0043164825003357-main.pdf (5,53 MB)
MD5: 33B9BF5EDA243D250C967A8D39969DB3
 https://www.sciencedirect.com/science/article/pii/S0043164825003357?via%3Dihub
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | In the presented study, a computational model was developed to analyse the wear behaviour of contacting mechanical elements like gears, bearings, etc. The model was built in the framework of the PrePoMax open-source CalculiX FEM (Finite Element Method) solver and enables a detailed analysis of the meshing dynamics of contacting mechanical elements. The model also considers the hyperelastic behaviour of the material in contact and the impact of operating temperature. The developed computational model was evaluated on a spur gear pair, where the pinion made of POM (Polyoxymethylene) was meshed with a support gear made of case-hardened steel 16MnCr5. The computational results were compared with the analytical results according to the VDI 2736 guidelines and experimental results on the real gear pairs. Compared to the standardised procedure according to the VDI 2736 guidelines, the model's main advantage is the geometry updating after a chosen number of loading cycles, enabling a more accurate prediction of wear behaviour under rolling/sliding loading conditions. |
|---|
| Ključne besede: | wear, polymer gears, computational modelling, experimental testing |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 28.11.2024 |
|---|
| Datum sprejetja članka: | 02.04.2025 |
|---|
| Datum objave: | 03.04.2025 |
|---|
| Založnik: | Elsevier |
|---|
| Leto izida: | 2025 |
|---|
| Št. strani: | 9 str. |
|---|
| Številčenje: | Vol. 572-573, [article no.] 206066 |
|---|
| PID: | 20.500.12556/DKUM-92429  |
|---|
| UDK: | 621.833:004.42 |
|---|
| COBISS.SI-ID: | 231751939 |
|---|
| DOI: | 10.1016/j.wear.2025.206066 |
|---|
| ISSN pri članku: | 1873-2577 |
|---|
| Avtorske pravice: | © 2025 The Authors |
|---|
| Datum objave v DKUM: | 08.04.2025 |
|---|
| Število ogledov: | 237 |
|---|
| Število prenosov: | 25 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
