| Naslov: | Cogging torque reduction techniques in axial flux permanent magnet machines : a review |
|---|
| Avtorji: | ID Pranjić, Franjo (Avtor)
ID Virtič, Peter (Avtor) |
|---|
| Datoteke: |  Pranjic_2024_Cogging_Torque_Reduction_Techniques.pdf (6,51 MB)
MD5: 02FA1E0861B258CBB5BF7D128E095CFD
 https://doi.org/10.3390/en17051089
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.02 - Pregledni znanstveni članek |
|---|
| Organizacija: | FE - Fakulteta za energetiko
|
|---|
| Opis: | Axial flux permanent magnet machines have garnered significant attention in recent years due to their numerous advantages in various applications, including electric vehicles, wind turbines, and robotics. However, one of the critical challenges associated with these machines is the presence of cogging torque, which can hinder their efficiency and performance. This review article provides a comprehensive overview of the state-of-the-art techniques employed for cogging torque reduction in Axial Flux Permanent Magnet Machines. Different techniques are described, encompassing geometric optimization, magnet placement, and skewing methods. Firstly, the significance of Axial Flux Permanent Magnet Machines is described, as well as the issue of the cogging torque. In the methods section, a review of the strategies for the reduction of cogging torque is described from various articles, and finally, in the discussion section, a list of actions is presented for cogging torque reduction for different topologies. The novelty of the study is that it combines strategies for cogging torque reduction in a single article. |
|---|
| Ključne besede: | cogging torque, axial flux permanent magnet machines, geometric optimization, magnet placement strategies, skewing techniques |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 17.01.2024 |
|---|
| Datum sprejetja članka: | 22.02.2024 |
|---|
| Datum objave: | 24.02.2024 |
|---|
| Založnik: | MDPI |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | Str. 1-19 |
|---|
| Številčenje: | Letn. 17, št. 5, št. članka 1089 |
|---|
| PID: | 20.500.12556/DKUM-93734  |
|---|
| UDK: | 621.313 |
|---|
| COBISS.SI-ID: | 186848259 |
|---|
| DOI: | 10.3390/en17051089 |
|---|
| ISSN pri članku: | 1996-1073 |
|---|
| Datum objave v DKUM: | 06.11.2025 |
|---|
| Število ogledov: | 232 |
|---|
| Število prenosov: | 15 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
