| Naslov: | Evaluation of the EAWS ergonomic analysis on the assembly line: xsens vs. manual expert method—a case study |
|---|
| Avtorji: | ID Breznik, Matic (Avtor)
ID Buchmeister, Borut (Avtor)
ID Vujica-Herzog, Nataša (Avtor) |
|---|
| Datoteke: |  sensors-25-04564-v2_(1).pdf (2,23 MB)
MD5: 07D10A6AA777B152CF160AB8475B32D3
 https://www.mdpi.com/1424-8220/25/15/4564
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | This study investigates the effectiveness of the Xsens motion capture system in performing ergonomic analysis compared to traditional manual assessments by experts in the specific environment of assembly lines. A comprehensive literature review emphasizes the need to investigate the reliability of new, promising high-tech systems. The main objective was therefore to compare the Ergonomic Assessment Worksheet (EAWS) assessment approach performed with Xsens motion capture technology and Process Simulate V16 software with the manual method using EAWS digital prepared by experts in the controlled workflow. The greatest value of the research conducted lies in the novel integration of the state-of-theart Xsens motion capture technology with the Process Simulate V16 software environment and the use of the licensed EAWS ergonomic method and Methods-Time Measurement Universal Analyzing System (MTM-UAS). The results are presented in the form of a case study. The results show a large similarity between the whole-body results and a large difference in the upper limb results, confirming the initial benefits of the Xsens equipment but also pointing to the need to verify its reliability on larger samples. The study highlights the potential of integrating Xsens motion capture data into ergonomic assessments and tuning of the assembly line to increase productivity and worker safety. |
|---|
| Ključne besede: | Xsens, motion capture, EWAS, ergonomic analysis, reliability |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 23.04.2025 |
|---|
| Datum sprejetja članka: | 21.07.2025 |
|---|
| Datum objave: | 23.07.2025 |
|---|
| Založnik: | MDPI |
|---|
| Leto izida: | 2025 |
|---|
| Št. strani: | 18 str. |
|---|
| Številčenje: | Vol. 25, iss. 15, [article no.] 4564 |
|---|
| PID: | 20.500.12556/DKUM-94321  |
|---|
| UDK: | 658.5.331.1 |
|---|
| COBISS.SI-ID: | 245035523 |
|---|
| DOI: | 10.3390/s25154564 |
|---|
| ISSN pri članku: | 1424-8220 |
|---|
| Datum objave v DKUM: | 13.08.2025 |
|---|
| Število ogledov: | 166 |
|---|
| Število prenosov: | 27 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
