| Naslov: | A novel body centered cubic 3D auxetic chiral geometry |
|---|
| Avtorji: | ID Caporale, Antonio Maria (Avtor)
ID Airoldi, Alessandro (Avtor)
ID Novak, Nejc (Avtor) |
|---|
| Datoteke: |  Caporale_2025_Smart_Mater._Struct._34_015050.pdf (6,04 MB)
MD5: E81F1B315F060476BF47E588324A43E8
 https://iopscience.iop.org/article/10.1088/1361-665X/ad9dc9
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Auxetic materials and structures have a negative Poisson’s ratio (PR), which means that they expand under a longitudinal tensile loading and shrink under compressive load. This property gives them an increased shear resistance, damping and energy absorption capabilities. Chiral geometries are among the most effective auxetic structures for their ability to convert the axial loading in the rotation of their internal nodes. In the present work, a novel 3D chiral geometry is presented, and its response is investigated both experimentally and numerically. It is made of spheres placed following a Body Centered Cubic lattice; each one connected to the closest neighbors by eight ligaments. A sample was 3D-printed and mechanically tested in compression exhibiting an auxetic behavior in certain directions. A Finite Element model was then developed, successfully reproducing the outcome of the experimental tests, both in terms of force and PR. Then, a numerical testing campaign was performed on representative units constrained using periodic boundary conditions. This campaign allows to evaluate the mechanical properties of the structure as a function of its geometrical parameters. It shows to be able to exhibit an approach a PR of −1 in all the directions. Moreover, the relationship between the sphere’s rotation, PR and instability was investigated. |
|---|
| Ključne besede: | three-dimensional auxetics, chiral, negative Poisson’s ratio, instability |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 27.09.2024 |
|---|
| Datum sprejetja članka: | 11.12.2024 |
|---|
| Datum objave: | 24.12.2024 |
|---|
| Založnik: | IOP Publishing |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | 18 str. |
|---|
| Številčenje: | let. 34, št. 1, št. članka 015050 |
|---|
| PID: | 20.500.12556/DKUM-94831  |
|---|
| UDK: | 539.2:004.9 |
|---|
| COBISS.SI-ID: | 224642563 |
|---|
| DOI: | 10.1088/1361-665X/ad9dc9 |
|---|
| ISSN pri članku: | 1361-665X |
|---|
| Avtorske pravice: | ©2024 The Author(s) |
|---|
| Datum objave v DKUM: | 28.08.2025 |
|---|
| Število ogledov: | 205 |
|---|
| Število prenosov: | 12 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
