| Naslov: | Large language models for G-code generation in CNC machining: A comparison of ChatGPT-3.5 and ChatGPT-4o |
|---|
| Avtorji: | ID Šket, Kristijan (Avtor)
ID Potočnik, David (Avtor)
ID Brezočnik, Miran (Avtor)
ID Ficko, Mirko (Avtor)
ID Klančnik, Simon (Avtor) |
|---|
| Datoteke: |  APEM20-2_224-238.pdf (4,02 MB)
MD5: 0BF2DCD76F94FF3AF7A74455CBEC9FFE
 https://apem-journal.org/Archives/2025/Abstract-APEM20-2_224-238.html
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | This research explores the viability of producing ISO G-code for 3-axis machining with OpenAI's Chat Generative Pre-Trained Transformer models, particularly ChatGPT-3.5 and the newer GPT-4o. G-code (RS-274-D, ISO 6983) converts human directives into commands that machines can understand, controlling toolpaths, spindle velocities, and feed rates to produce particular aspects of an object. Previously, G-code was generated either by hand or through the use of computer-aided manufacturing (CAM) software along with machine-specific post-processors, both of which may require considerable time and expense. This research aimed to assess the practicality and effectiveness of specific large language models (LLMs) in generating G-code. The assessment took place in three distinct phases on a sample component that required 3-axis machining. These phases included: (1) the self-generated production of G-code for the sample component, (2) the examination of the independently generated G-code in the CAM application, and (3) the recognition and justification of mistakes in the G-code. The outcomes indicated varying abilities with promising findings. This method could accelerate and possibly enhance manufacturing workflows by decreasing reliance on expensive CAM software and specialized knowledge. |
|---|
| Ključne besede: | generative artificial intelligence, intelligent manufacturing, large language models (LLM), ChatGPT, CNC machining, G-code programming |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 09.05.2025 |
|---|
| Datum sprejetja članka: | 19.06.2025 |
|---|
| Datum objave: | 29.07.2025 |
|---|
| Založnik: | University of Maribor |
|---|
| Leto izida: | 2025 |
|---|
| Št. strani: | str. 224-238 |
|---|
| Številčenje: | Vol. 20, no. 2 |
|---|
| PID: | 20.500.12556/DKUM-96065  |
|---|
| UDK: | 621:681.5 |
|---|
| COBISS.SI-ID: | 256562947 |
|---|
| DOI: | 10.14743/apem2025.2.537 |
|---|
| ISSN pri članku: | 1855-6531 |
|---|
| Datum objave v DKUM: | 28.11.2025 |
|---|
| Število ogledov: | 388 |
|---|
| Število prenosov: | 36 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
