| Naslov: | Optimization of an IPMSM for constant-angle square-wave control of a BLDC drive |
|---|
| Avtorji: | ID Garmut, Mitja (Avtor)
ID Steentjes, Simon (Avtor)
ID Petrun, Martin (Avtor) |
|---|
| Datoteke: |  mathematics-12-01418-v2.pdf (2,87 MB)
MD5: 68DF5011F574D659FA64E688158407CC
 https://www.mdpi.com/2227-7390/12/10/1418
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FERI - Fakulteta za elektrotehniko, računalništvo in informatiko
|
|---|
| Opis: | Interior permanent magnet synchronous machines (IPMSMs) driven with a square-wave
control (i.e., six-step, block, or 120◦ control), known commonly as brushless direct current (BLDC)
drives, are used widely due to their high power density and control simplicity. The advance firing
(AF) angle is employed to achieve improved operation characteristics of the drive. The AF angle is,
in general, applied to compensate for the commutation effects. In the case of an IPMSM, the AF angle
can also be adjusted to exploit reluctance torque. In this paper, a detailed study was performed to
understand its effect on the drive’s performance in regard to reluctance torque. Furthermore, a multiobjective optimization of the machine’s cross-section using neural network models was conducted to
enhance performance at a constant AF angle. The reference and improved machine designs were
evaluated in a system-level simulation, where the impact was considered of the commutation of
currents. A significant improvement in the machine performance was achieved after optimizing the
geometry and implementing a fixed AF angle of 10◦. |
|---|
| Ključne besede: | MTPA, maximum torque per ampere, IPM SM, interior permanent magnet synchronous machine, BLDC, brushless direct current drive, rotor optimization, square-wave control, advance firing angle, neural network |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 11.04.2024 |
|---|
| Datum sprejetja članka: | 03.05.2024 |
|---|
| Datum objave: | 07.05.2024 |
|---|
| Založnik: | MDPI |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | 25 str. |
|---|
| Številčenje: | Vol. 12, no. 10, [article no.] 1418 |
|---|
| PID: | 20.500.12556/DKUM-96477  |
|---|
| UDK: | 621.3 |
|---|
| COBISS.SI-ID: | 194790659 |
|---|
| DOI: | 10.3390/math12101418 |
|---|
| ISSN pri članku: | 2227-7390 |
|---|
| Avtorske pravice: | © 2024 by the authors |
|---|
| Datum objave v DKUM: | 13.01.2026 |
|---|
| Število ogledov: | 141 |
|---|
| Število prenosov: | 10 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
