| Naslov: | Microstructure characterization of Al-alloy AW 5454 intended for ecological laser hybrid welding |
|---|
| Avtorji: | ID Balant, Matjaž (Avtor)
ID Rudolf, Rebeka (Avtor) |
|---|
| Datoteke: |  5_MMD_30_PP.pdf (766,77 KB)
MD5: 3247810C6DCFD2AC6B7B9F30DE3EEE15
 https://metall-mater-data.com/index.php/home/article/view/30/33
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.02 - Pregledni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | This article presents the microstructure characterization of Al-alloy AW 5454, which is intended for laser hybrid welding. In the first part, the procedure of laser hybrid welding is described and compared to other laser surface modification techniques. Subsequently, key methods of metallographic characterization and hardness measurements at selected locations of Al-alloy AW 5454 are presented, enabling a scientific evaluation of the obtained results. The goal of the research was to gain insight into the microstructure of Al-alloy AW 5454, which will, in the future, make it possible to determine the technological parameters of laser hybrid welding that have the greatest influence on the final microstructure and, consequently, on the properties of the weld. |
|---|
| Ključne besede: | Al-alloys, laser treatment, characterization, misrostructure, hardness |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 05.06.2024 |
|---|
| Datum sprejetja članka: | 19.06.2024 |
|---|
| Datum objave: | 01.01.2024 |
|---|
| Založnik: | Association of Metallurgical Engineers of Serbia; Faculty of Technological Metallurgy, University of Belgrade; Institure for Technology of Nuclear and Other Mineral Resources (ITNMS) |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | str. 59-64 |
|---|
| Številčenje: | Vol. 2, no. 2 |
|---|
| PID: | 20.500.12556/DKUM-96487  |
|---|
| UDK: | 621.74:669 |
|---|
| COBISS.SI-ID: | 202785539 |
|---|
| DOI: | 10.30544/MMD30 |
|---|
| ISSN pri članku: | 2956-1795 |
|---|
| Avtorske pravice: | © 2023 by the authors |
|---|
| Datum objave v DKUM: | 14.01.2026 |
|---|
| Število ogledov: | 133 |
|---|
| Število prenosov: | 4 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
