| Naslov: | Implementation of a virtual instrument in the system for measuring forces and temperatures in the milling process |
|---|
| Avtorji: | ID Savković, Borislav (Avtor)
ID Rodić, Dragan (Avtor)
ID Sekulić, Milenko (Avtor)
ID Kovač, Pavel (Avtor)
ID Strbac, Branko (Avtor)
ID Klančnik, Simon (Avtor) |
|---|
| Datoteke: |  processes-12-01344.pdf (5,42 MB)
MD5: 0A2EA7D480B6853D04EFCD8B8E4A8C04
 https://www.mdpi.com/2227-9717/12/7/1344
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | This study presents the development of a measurement acquisition system for force measurement and temperature cutting using virtual instrumentation. The developed measurement chain enables very efficient, accurate, reliable and fast data collection during the measurement process. The presented acquisition system was developed for the face milling process, but its application is also intended for turning or grinding processes. Emphasis is placed on the creation and description of a software solution in order to manage hardware measuring sensors. Two versions of the virtual instrument are presented. The first one is based on the measurement of three components of cutting forces, obtained by means of a piezoelectric dynamometer. And the second one is upgraded with another channel that represents the temperature change record obtained by the thermocouple. At the end, the experimental results for face milling are shown. A graphical diagram obtained based on some of the data generated by the innovative measuring chain applied to the milling process is presented. |
|---|
| Ključne besede: | virtual instrumentation, acquisition, cutting forces, temperature, milling |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 27.05.2024 |
|---|
| Datum sprejetja članka: | 25.06.2024 |
|---|
| Datum objave: | 28.06.2024 |
|---|
| Založnik: | MDPI |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | 22 str. |
|---|
| Številčenje: | Vol. 12, iss. 7, [article no.] 1344 |
|---|
| PID: | 20.500.12556/DKUM-96490  |
|---|
| UDK: | 544.3/.4 |
|---|
| COBISS.SI-ID: | 203429891 |
|---|
| DOI: | 10.3390/pr12071344 |
|---|
| ISSN pri članku: | 2227-9717 |
|---|
| Avtorske pravice: | © 2024 by the authors |
|---|
| Datum objave v DKUM: | 14.01.2026 |
|---|
| Število ogledov: | 144 |
|---|
| Število prenosov: | 2 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
